BOSCH PVA 2P500 PAVIRO Power Amplifier
SKU:307,500৳
The BOSCH PVA 2P500 PAVIRO power amplifier is a 2 x 500 Watt professional audio Class D-amplifier for evacuation purposes. It can be operated from both the mains and a DC supply.
- Floating 100 V or 70 V power outputs
- High efficient amplifier blocks in class-D technology
- Outputs idling and short circuit-protected
- Mains operation 120–240 V (50/60 Hz) and/or 24 V DC emergency backup
- Electronically balanced inputs
- Temperature monitoring function
- Pilot tone and ground fault monitoring function via PVA-4CR12 controller or PVA-4R24 router
- Processor control of all functions
- Monitoring of the processor system via watchdog circuit
- Non-volatile FLASH memory for configuration data
- Internal monitoring function
- Integrated audio relays
- Line monitoring function
BOSCH PVA 2P500 PAVIRO Power Amplifier Sprecs:
The PVA 2P500 benefits from the lowest power consumption of any system in its class, minimizing running costs and requiring fewer backup batteries too. The system is extremely flexible and allows architecture changes at any time during installation and has a wide range of announcement/music combinations.
Ideal for small to medium-sized offices, regional airports, mid-sized hotels, factories, schools, and department stores. It can be operated from both the mains and a DC supply. The output voltage is galvanically insulated and is constantly monitored for a ground fault. An energy-saving mode and temperature-controlled fans reduce energy consumption and noise levels.
The control and monitoring functions are performed via CAN bus. This amplifier is designed for operation in an emergency evacuation system. The amplifiers are usually controlled via a controller and configured using IRISNet.
| Rated load impedance (output power) | |
| • 100 V | 20 Ω (500 W) |
| • 70 V | 10 Ω (500 W) |
| Rated output power, 1 kHz, THD ≤ 1% | 2 ✕ 500 W1 |
| Rated input voltage | +6 dBu |
| Max. RMS voltage swing, 1 kHz, THD ≤ 1%, without load | |
| • 100 V | 110 V |
| • 70 V | 78 V |
| Voltage gain, ref. 1 kHz, fixed | |
| • 70 V | 33.2 dB |
| • 100 V | 36.2 dB |
| Maximum load capacitance | 2 μF |
| Input level, max. | +18 dBu (9.75 Vrms) |
| Frequency response, ref. 1 kHz, rated load, -3 dB | 50 Hz to 25 kHz |
| Input impedance, active balanced | 20 kΩ |
| Signal-to-noise ratio (A-weighted) | > 104 dB |
| Output noise (A-weighted) | < -62 dBu |
| Crosstalk , ref. 1 kHz | < -85 dB |
| Output stage topology | Class-D, transformer, floating |
| Power requirements | |
| • AC | 115–240 V (-10/+10%)2 |
| • DC | 21‑32 V |
| Power consumption, AC and DC | See section “Power consumption” in the operation manual |
| Inrush current | 2A |
| Inrush current, after a five-second power cycle | 1.3A |
| Mains fuse | T6.3A (internally) |
| DC fuse | 30A (internally) |
| Ground fault | R < 50 kΩ |
| CAN-BUS port | 2 ✕ RJ-45, 10 to 500 kbit/s |
| Protection | Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains Undervoltage protection, DC supply Undervoltage protection, inrush current limiter, ground fault |
| Cooling | Front-to-rear, temperature-controlled fans |
| Operating temperature | -5 °C to +45 °C |
| Safety class | Class I |
| Electromagnetic environment | E1, E2, E3 |
| Product dimensions (Width ✕ Height ✕ Depth) | 19”, 2 HU, 483 ✕ 88.2 ✕ 391mm |
| Net Weight | 16.5kg |
| Brand |
|---|
Related products
-
BOSCH PVA-15CST Call Station
102,000৳Add to cart-
Five menu/function keys (pre-programmed) – one green or one yellow indicator light per button
-
15 selection buttons (customizable) – two indicator lights (green/red) per button
-
Label with transparent covering – the label can be changed at any time
-
BOSCH PVA-15CST Call Station can be used as a standing or desk/rack flush-mounted device
-
Internal monitoring with error logging – complying with all relevant national and international standards
-
Easy configuration – use of the Configuration Wizard or IRIS-Net software
-
Button installation slots for up to 3 optional emergency buttons, or key switches
-
-
ITC T-650 Mixer Power Amplifier
66,500৳Add to cartProduct Code: OTC2427
The basic public address mixer-amplifier. It is featured with 3 microphone inputs, 2 aux inputs, and 1 EMC input. Priority muting is achieved via EMC for overriding other inputs except for Mic1 on the front panel.
Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls, and master volume control are provided for overall tone control. 70V, 100V, and low impedance 4-16 ohms speaker outputs are provided. Extensive protection from short-circuit, overload, and high temp.
-
ITC T-650D Mixer Amplifier
63,000৳Add to cartProduct Code: OTC2421
- The basic public address mixer amplifiers have power ratings from 650W. It’s featured of 3 balanced microphone inputs, 2 aux inputs, and 2 EMC inputs.
- Priority muting is achieved via EMC1-2 for overriding other inputs except for Mic1 on the front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls, and master volume control are provided for overall tone control.
- 70V, 100V, and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload, and high temp.
-
ITC-t-6701 Rack Mount Network Audio Adapter Power Amplifier
35,500৳Add to cart- 19 rack mount IP/TCP network audio adapter in 2U height
- ITC-t-6701 amplifier built-in single-channel TCP/IP decoder
- Decode digital audio data to analog amplifier
- Heart of IP background music, zone paging & voice alarm system
- Built-in 3.4 inch LCD screen displays the IP address and status in English
- Supplied a remote control over music selection, IP address change and volume attenuation
- A serial IP address write in communication port
- Numeric keys on the front panel for convenient operation
- 4 channel line outputs to amplifiers
- 4 channel 100V speaker inputs loop and 4 channel 3 wired volume control inputs
- 1 external line input (with volume control) and microphone input
- Automatically power off when no input for 5 minutes and automatically power on when
- signal feed into
- Pre-set power management
Reviews
There are no reviews yet.