Category
- Access Control
- Access Control Package
- Accessories
- Adapters and Connectors
- Agro
- Audio Accessories
- Bangla Quran Speaker
- Barcode Scanner
- Battery and Accessories
- Best Speaker
- Blackmagic Design
- Call Station
- Camera
- Capture Devices
- Car Checking System
- CCTV & Accessories
- Classroom Sound System
- Conference System
- Dash Camera
- Document Camera
- Elevator Controller
- Forklift
- GNSS Receiver and Accessories
- Guard Patrol System
- Lighting System
- Medical Equipment
- Megaphone
- Memory & HDD
- Metal Detector
- Microphone
- Microphone Foam Cover
- Microscope/Binocular
- Mosque Sound Solution Package
- Networking Products
- OLT Products
- PA
- PA Amplifier
- PA System
- PABX System
- Paperless Conference System
- Passport Scanner
- Podium System
- Portable Amplifier
- POS Terminal Device
- Power Supply
- Printer
- Projector
- PTZ Camera
- Repeater
- RFID Accessories
- Router
- Safety Products
- Security Products
- Smart Board Bangladesh
- Smart Door Lock
- Spill Kit
- Studio & ENG Camera
- Tools & Equipment
- Traffic Equipment
- Turnstile Gate
- VHF & UHF Antennas
- Video Conference
- Video Intercom System
- Walk Through Metal Detector
- Walkie Talkie
- Walkie-Talkie Battery & Accessories
- Wireless Conference System
- Wireless Guide System
- Wireless Products
- X-Ray Baggage Scanner
- Zoom Software
Ahuja CWM-400V Wireless Podium Microphone
SKU:Brand Name : | Ahuja |
Model No : | CWM-400V |
Type of Product : | Microphone |
Mic Type : | Condenser |
Impedance : | NA |
Polar Pattern : | Cardioid |
Ahuja CWM-400V Wireless Podium Microphone Specs:
- CWM-400V consists of a high band VHF wireless receiver and 4 nos. wireless table-top gooseneck microphones. The gooseneck microphones can be kept on a podium, or spread out across a conference table, some distance away from the Receiver. Wireless link between the gooseneck microphones and the Receiver allows fast and easy installation, and immense flexibility in shifting the position of the microphones as per requirement.
- It is ideal for conferences and assemblies, as well as for a variety of announcement & other PA applications.
- Up to 8 microphones of different frequencies can be used (with 2 Receivers).
- A backup facility exists of connecting the microphones directly to an amplifier with suitable additional cables in case wireless operation is not desired
- under some circumstances.
- The CWM-400V system is elegantly designed, with a slim 4 Channel Receiver and compact, lightweight microphones. The system is designed for rugged, professional use, and is optimally tailored for very clear, intelligible sound.
- Compact and elegant high band VHF wireless microphone system with four gooseneck microphones.
- Microphones available in 8 different frequencies (2 sets of 4 each).
- Microphones are unidirectional condenser types, fitted with gooseneck, ON/OFF switch and an indicator LED.
- Sleek table-top receiver which can receive signals from upto 4 microphones.
- Individual output volume control and a RF LED for each channel provided on the front panel of the receiver.
- Separate 6.3mm phone jack for audio output from each channel available on the rear panel.
- Microphone operates with 2×1.5V AAA alkaline cells.
- Receiver operates on12V DC through an AC adaptor, supplied along with.
MICROPHONE | |
RF Output Power | 10mW (Max.) |
Modulation Mode | FM |
Microphone Element | Condenser, Cardioid |
Maximum Deviation | ± 18kHz |
Frequency Response | 80Hz-15kHz |
Power Requirement | 2×1.5V AAA alkaline cells |
Current Consumption | <60mA |
Controls | ON/OFF Push Switch |
Indication | Red ring LED in the gooseneck & Red round LED in the base |
Dimensions | W90 × H60 × D130 mm (mic. base) |
Weight | 0.55kg (without battery) |
RECEIVER | |
Frequency Stability | ± 0.005% |
Audio Output | 0-50mV adjustable (each channel) |
Signal to Noise Ratio | >80dB |
Distortion | <0.5% |
Antenna Type | Telescopic |
Power Requirement | 220V-240V AC 50Hz for AC adaptor (supplied alongwith) |
Controls | Power Switch, Output Volume Control for each channel |
Indication | Red LED for Power ON, Green LED for RF indication of each channel |
Dimensions | W420 × H54 × D210 mm |
Weight | 1.80kg |
ACCESSORIES | |
2×Connection Cable for connecting RF receiver to an amplifier | |
1×AC Adaptor, 2×1.5V AAA Alkaline Cells for each microphone | |
Brand |
---|
Related products
-
Ahuja AWM-490VHL Dual PA Wireless Microphone
Read more- Compact, lightweight, Dual Channel VHF Wireless Microphone System available in 5 different frequency groups.
- Combination of a hand-held dynamic microphone & a tie-clip condenser microphone for a wide variety of applications.
- Internal Antenna in the Microphone and two telescopic Antennas in the Receiver for clear and distortion free reception.
- Receiver operates on 9V DC through an AC Adaptor supplied along with the system. Each microphone operates with a 9V Dry Battery.
-
Ahuja AWM 495V2 Dual Wireless Microphone
Read more- Compact, lightweight, Dual Channel VHF Wireless Microphone System. Operates at Quartz Crystal Locked VHF High Band frequency and available in different frequency groups. Two transmitters with separate frequencies and one dual channel receiver.
- Internal antenna in the transmitter and two telescopic antennas in the receiver for clear and distortion-free reception.
- Receiver operates on 12V DC through an AC Adaptor supplied alongwith the system. Each transmitter operates with a 2×1.5V AA Pencil Cell. Transmitters have 2-position ON/OFF slide switch.
- Audio output from receiver available at OUT 1 & OUT 2 individually and as mixed output at OUT 1 + 2.
- Ideal for: PA Applications… Stage & Auditoriums… Seminar Halls… Places of Worship… Recreation Centres.
Call for Price
-
AHUJA AWM-520VH Single Hand Wireless Microphone
Read moreAhuja AWM-520VH PA VHF Wireless Microphone comes with elegant and affordable single channel VHF wireless microphone available in different frequencies. Handheld dynamic unidirectional transmitter with a three position slide switch and Low Battery LED indicator. Stylish table-top receiver with a telescopic antenna & noise squelch circuitry. Power ON/OFF switch and output volume control on the front panel. 6.3mm (¼”) phone jack for audio output on the rear panel. Transmitter operates with 1×9V battery. Receiver operates on 9V DC through an AC adaptor, supplied along with the transmitter. Ideal for: PA Applications, Stage & Auditoriums, Stadia, Seminar Halls, Places of Worship, Recreation Centres etc.
Reviews
There are no reviews yet.