Category
- Access Control
- Access Control Package
- Accessories
- Adapters and Connectors
- Agro
- Audio Accessories
- Bangla Quran Speaker
- Barcode Scanner
- Battery and Accessories
- Blackmagic Design
- Call Station
- Camera
- Capture Devices
- Car Checking System
- CCTV & Accessories
- Classroom Sound System
- Conference System
- Dash Camera
- Document Camera
- Elevator Controller
- Forklift
- GNSS Receiver and Accessories
- Guard Patrol System
- Lighting System
- Medical Equipment
- Megaphone
- Memory & HDD
- Metal Detector
- Microphone
- Microphone Foam Cover
- Mosque Sound Solution Package
- Networking Products
- OLT Products
- PA Amplifier
- PA System
- PABX System
- Paperless Conference System
- Passport Scanner
- Podium System
- Portable Amplifier
- POS Terminal Device
- Power Supply
- Printer
- Projector
- PTZ Camera
- Repeater
- RFID Accessories
- Router
- Safety Products
- Security Products
- Smart Board
- Smart Door Lock
- Speaker
- Spill Kit
- Studio & ENG Camera
- Tools & Equipment
- Traffic Equipment
- Turnstile Gate
- VHF & UHF Antennas
- Video Conference
- Video Intercom System
- Walk Through Metal Detector
- Walkie Talkie
- Walkie-Talkie Battery & Accessories
- Wireless Conference System
- Wireless Guide System
- Wireless Products
- X-Ray Baggage Scanner
- Zoom Software
BOSCH DCNM-WAP Wireless Access Point
- Truly wireless, no need for an additional WiFi router for tablet control.
- Easy and intuitive web browser interface for system setup, configuration, control and licensing.
- Native support for camera control.
- Range test function to guarantee that all Wireless Devices are in range, independent of the selected WiFi frequency.
- Remote interfacing using API to control microphones and third‑party camera systems. Zero Interference
- Seamless automatic wireless frequency channel switching.
- Operates in the (license‑free) bands:
- 2.4 GHz.
- 5 GHz (UNII‑1, UNII‑2, UNII‑2 extended, and UNII‑3).
- Packet Loss Concealment to mask the effects of lost or discarded packets.
Call for Price
BOSCH DCNM-WAP Wireless Access Point Specs:
The Bosch DCNM-WAP wireless access point is used as a central control device for the Bosch Dicentis wireless discussion system. The DCNMWAP can be mounted on a table, wall, or ceiling and requires no central control unit. It is truly wireless with no need for an additional router or tablet control. A simple intuitive web interface is used for system setup, configuration, control and licensing.
- Based on standard WiFi according to IEEE 802.11n
- WPA2 encryption for secure communication
- Seamless frequency switching in the 2.4 GHz and 5 GHz band
- Powering via power supply adapter, Power over Ethernet or DCN multimedia System Network Cable
Zero Interference
- Seamless automatic wireless frequency channel switching; up to 44 channels in the 2.4/5 GHz band.
- Packet Loss Concealment to mask the effects of lost or discarded packets.
Standard WiFi
- Visibility in the IT infrastructure.
- Coexistence with other WiFi networks.
System cameras
- To give a clear visual overview of the proceedings.
- A maximum of six HD Conference Dome cameras can be connected to the system with native support.
- The camera presets can be configured in the web interface.
- SDI Connection for little video latency.
General
- Powering via either: Power supply adapter, Power over Ethernet (PoE), or DCN multimedia System Network Cable.
- Typical wireless coverage area range of 30 m x 30 m.
- Functionality is modular; expandable via licensing.
The wireless access point is used for all configuration and initial set up via web interface. These settings include:
- User management shall give the possibility to create several users with user specific access to functionality.
- Line input/output and routing settings.
- 5‑band parametric equalizer.
- Camera control and HD-SDI switcher configuration.
- Wireless network SSID and WPA2 settings.
- Wired network host‑name setting (DHCP and zero‑config protocol based on Bonjour, fixed IP address is not supported).
- Upload of custom logo, which shall be shown in the Wireless Device Extended.
- GUI language setting.
- Factory default.
- Device subscription, using standard WPS protocol.
- Seat naming including priority setting for the chairperson (Maximum up to 15 Wireless Devices can have priority).
- Dual‑use setting (requires DCNM‑LSDU per DCNM‑WD/WDE).
- Camera preposition assignment to seats (requires one DCNM‑LCC per DCNM‑WAP).
- Date and time settings. Automatic date and time synchronization through ntp server from the internet or supplied by the local DHCP server.
- Firmware upgrade of all devices and the WAP, using the wireless network (not supported when using the web interface on a tablet).
- License activation (not supported when using the web interface on a tablet).
Supply voltage (PSU) | 100‑240 Vac 50‑60 Hz in48 Vdc out |
PoE | 802.3af, 802.3at – type 1 mode A (endspan), mode B (midspan) |
DCNM system supply | 48 Vdc |
Power consumption | 10 W |
Frequency response | 80 Hz – 20 kHz |
THD at nominal level | <0.1 % |
Dynamic range | >98 dBA |
Signal‑to‑noise ratio | >96 dBA |
Ethernet | 1000Base‑T IEEE 802.3ab |
Jack nominal | -18 dBV |
Jack maximum | +18 dBV |
Jack nominal | -18 dBV |
Jack maximum | +20 dBV |
WIFI standard | IEEE 802.11n |
Frequency Range | 2.4 GHz and 5 GHz (ISM license-free) |
Mounting | Ceiling, Wall or Tripod floor stand (using included bracket) |
Dimensions (H x W x D) with bracket | 285 x 202 x 65 mm(11.2 x 8.0 x 2.6 in) |
Weight: with bracket without bracket | 958 g (2.11 lb)725 g (1.60 lb) |
Color | Light grey (RAL 000 7500) |
Operating temperature | 5 ºC to +45 ºC(41 ºF to +113 ºF) |
Storage temperature | -20 ºC to +70 ºC(-4 ºF to +158 ºF) |
Relative humidity | < 95 %, > 5 % |
Related products
-
SHURE Discussion Unit 5980P Digital Conference System
45,500৳Add to cartSHURE Discussion Unit 5980P is a fully digital portable conference unit that can be configured either as a chairman, delegate, or interpreter unit. By default, the unit is configured as a delegate unit but the button overlay is changeable to match the desired functionality.
Reconfiguration is easily done in just a matter of seconds and the unit will keep its configuration even if it is used in another DDS 5900 system. Depending on the configuration the left button changes functionality. Chairman configuration support “Del. Off’ that allows the chairman to switch off all active delegate microphones.
The delegate and interpreter configuration support ‘Mute’ functionality that allows the user to temporarily mute his/her active microphone while the mute button is pressed down. The delegate configuration can also be changed to omit the ‘Mute’ functionality so the delegate only has a ‘Speak’ button.
The ‘Speak’ button enables the user to activate/deactivate the microphone. The floor channel is distributed through the built-in loudspeaker except when the microphone is active. By connecting a headphone the user can listen to the floor channel or one of the 2 interpretation channels. Headphone volume can be adjusted with the volume buttons.
Interpreters will always listen to the floor channel in the headphone and can select the outgoing channel for interpretation.
A gooseneck microphone (GM 59xx or GM 6xxx) can be inserted into the lockable XLR socket. The lock is accessible from a small hole beside the XLR socket with a 1.5 mm hex key. Turning the hex key counterclockwise locks the gooseneck microphone and turning the hex key clockwise unlocks the gooseneck microphone from the unit.
-
AHUJA CMA 5400 Conference System Central Amplifier
42,600৳Add to cart- Highly sensitive 18.5″ (47cm) long gooseneck microphone for comfortable sharing by two delegates.
Bright and uniform band LED indicator AHUJA CMA 5400 amplifier model. - Chairman/Delegate Units have an attractive and well-contoured plastic top for a superior appearance.
- Rugged and compact die-cast aluminum base for better stability of Chairman/Delegate Units.
- Adjustable headphone output is available from each Chairman/Delegate Unit.
- Automatic Mic Off feature in Delegate units which is selectable through a switch in the Central Amplifier.
- Chairman Unit has Priority Switch.
- Central Amplifier has a digital recorder for recording the proceedings. Also, it can playback pre-recorded messages.
- Switchable send/return facility in Central Amplifier.
- Three Mic inputs and one Aux input for various user applications.
- 50W PA Amplifier for adequate sound reinforcement.
- Headphone output provided in Central Amplifier for monitoring purposes.
- AC Mains & 24V DC operation.
- Central Amplifier is 19″ rack-mountable.
- Central Amplifier has the facility of feeding two independent groups of Delegate Units as required in large conference setups.
- The conference System can be installed in a bus bar arrangement by using Junction Boxes CB-45.
- Highly sensitive 18.5″ (47cm) long gooseneck microphone for comfortable sharing by two delegates.
-
ITC TS-W101A Conference Delegate Unit
78,500৳Add to cart- The wireless conference system is composed of a wireless controller host, desktop wireless.
- 5G wireless communication frequency band, with stronger bandwidth and communication speed
- 4 meeting modes: FIFO; NORMAL; VOICE; APPLY
- Support manual/auto ID setting
- Support 300 PCS wireless microphone and 4096 wired microphone by adding extension device
- Support USB recording and playback
- Built-in 2*25W amplifier
- 8ms ultra-low delay, support 6 wireless, and 8 wired microphones open simultaneously
- Support PC software control and management
- Support fire linkage, tea notice function
- Adopt 128 bits AES encryption technology
Reviews
There are no reviews yet.