No products in the cart.
Chartu CH-M2100A CAT5 Wired Chairman Unit for Conference System
Chartu CH-M2100A CAT5 is a wired desktop speech and voting conference unit with OLED, built-in speaker and earphone line out, non-compressed audio transmission, 48K sampling rate, 20Hz~20KHz bandwidth, chairman unit can close delegate speaking, initiate and end attendance/voting.
৳ 1
Description
Chartu CH-M2100A CAT5 Wired Chairman Unit for Conference System Specs:
CHARTU CH-M2100A wired chairman’s console with a CAT-5 interface for connecting to the central unit for a wired conference system CHARTU 2000CAT5 is supplied with a microphone on a long flexible gooseneck stand. The CHARTU CH-SDMIC ultra-short 360-degree omnidirectional microphone in stealth design is available separately. CHARTU CH-M2100A wired chairman unit has a built-in OLED display speaker and a headphone output. CHARTU CH-M2100A wired chairman unit is connected to the central unit using CAT-5 twisted pair cables, ensuring stable operation with reliable and high-quality sound transmission.
Audio transmission from the CHARTU CH-M2100A chairman unit is performed in uncompressed form with a sampling rate of 48K and a bandwidth from 20 to 20,000 Hz. The CHARTU CH-M2100A chairman unit is powered via the POE protocol from the CHARTU CH-2000 central unit.
The built-in speaker in the CHARTU CH-M2100A chairman unit can be used to listen to performances in small halls (20-30 square meters) without a speaker system. The built-in headphone output can be used for confidential conferences. The wired conference system supports the modes of using microphone consoles – FIFO, APPLY and NORMAL. The CHARTU CH-M2100A chairman unit has keys to close a delegate’s speech, initiate and end voting.
Specifications
| Model | CHARTU CH-M2100A |
| Power supply | POE from central unit |
| Connection interface | 2 x RJ45 |
| Simultaneous translation | Not supported |
| Base | Remote without microphone |
| Headphone jack | mini JACK stereo 3.5 mm |
| Frequency response | 20 Hz ~ 20 kHz |
| Headphone impedance load | > 32 ohm <1 k ohm |
| Loudspeaker output power | 2 × 15 mW / 32 Ohm |
| Signal to noise ratio | > 80 dB |
| Crosstalk | > 80 dB |
| Harmonic distortion | <0.05% |
| Control display | 128×32 px (blue symbols on a black background) |
| Dimensions (edit) | 220 x 130 x 62 mm |
| Color | the black |
| Max. power consumption | 1.5 watts |
Additional information
| Brand |
|---|
Reviews
There are no reviews yet.