Category
- Access Control
- Access Control Package
- Accessories
- Adapters and Connectors
- Agro
- Audio Accessories
- Bangla Quran Speaker
- Barcode Scanner
- Battery and Accessories
- Best Speaker
- Blackmagic Design
- Call Station
- Camera
- Capture Devices
- Car Checking System
- CCTV & Accessories
- Classroom Sound System
- Conference System
- Dash Camera
- Document Camera
- Elevator Controller
- Forklift
- GNSS Receiver and Accessories
- Guard Patrol System
- Lighting System
- Medical Equipment
- Megaphone
- Memory & HDD
- Metal Detector
- Microphone
- Microphone Foam Cover
- Microscope/Binocular
- Mosque Sound Solution Package
- Networking Products
- OLT Products
- PA
- PA Amplifier
- PA System
- PABX System
- Paperless Conference System
- Passport Scanner
- Podium System
- Portable Amplifier
- POS Terminal Device
- Power Supply
- Printer
- Projector
- PTZ Camera
- Repeater
- RFID Accessories
- Router
- Safety Products
- Security Products
- Smart Board Bangladesh
- Smart Door Lock
- Spill Kit
- Studio & ENG Camera
- Tools & Equipment
- Traffic Equipment
- Turnstile Gate
- VHF & UHF Antennas
- Video Conference
- Video Intercom System
- Walk Through Metal Detector
- Walkie Talkie
- Walkie-Talkie Battery & Accessories
- Wireless Conference System
- Wireless Guide System
- Wireless Products
- X-Ray Baggage Scanner
- Zoom Software
GCOM S6300-26XQ L3 Switch
SKU:1৳
Product Code: OTC2840
The L3-managed switch GCOM S6300-26XQ is a switch with a high port density and all the necessary sets of L3 level functions. L3 GCOM S6300-26XQ has on board 24 * 10GE SFP + and 2 * 40GE QSFP ports for APLINK organization. It supports stacking and 3 fans (hot-swappable) and all the necessary features for organizing high-quality service, as well as cable diagnostics, DDM, and static protection. The GCOM S6300-26XQ uses a high-end processor to provide maximum speed forwarding and line creation for NGBN (New Generation Backbone Network), has extensive ACL capabilities, IP + MAC + port bindings, and much more.
Call for Price
GCOM S6300-26XQ L3 Switch Spec:
Backplane capacity | 640Gbps |
Switching capacity | 512Gbps |
Throughput (IPv4/IPv6) | 480Mpps |
Memory and storage | 1024MB DDR2 SDRAM Memory and 16MB Flash Memory |
Redundancy design | 1+1 hot-swap redundant power |
Power supply | AC:Input 100~240V,50~60Hz; |
DC:Input -36V~-72V; | |
Power consumption | Full-load ≤130W |
Outline dimensions | 437mm×360mm×44mm |
Weight (in maximum configuration) | ≤8.5kg |
Environmental requirements | Working temperature:0°C~55°C |
Storage temperature:-20°C~70°C | |
Relative humidity:10%~90%,no condensing | |
Electromagnetic compatibility |
L2 features | MAC | 128K MAC address |
MAC Black Hole | ||
Port MAC Limit | ||
Source MAC filtration | ||
VLAN | 4K VLAN entries | |
Port-based/MAC-based/IP subnet-based VLAN | ||
Port-based QinQ and Selective QinQ (StackVLAN) | ||
1:1 and N:1 VLAN | ||
VLAN Swap and VLAN Remark | ||
PVLAN to realize port isolation and saving public-vlan resources | ||
GVRP | ||
Spanning tree protocol | IEEE802.1D Spanning Tree Protocol (STP) | |
IEEE802.1w Rapid Spanning Tree Protocol (RSTP) | ||
IEEE802.1s Multiple Spanning Tree Protocol instances (MSTP) | ||
Remote loop detecting | ||
BPDU protection | ||
Root protection | ||
RRPP ring topology | ||
RRPP instance | ||
Port | Bi-directional bandwidth control | |
Static link aggregation and LACP(Link Aggregation Control Protocol) | ||
Port mirroring and traffic mirroring | ||
Security features | User’s security | Anti-ARP-spoofing |
Anti-ARP-flooding | ||
IP Source Guard create IP+VLAN+MAC+Port binding | ||
Port Isolation | ||
MAC address binds to port and port MAC address filtration | ||
IEEE 802.1x and AAA/Radius authentication | ||
Device security | Anti-DOS attack(such as ARP,Synflood, Smurf, ICMP attack), ARP detection, worm and Msblaster worm attack | |
SSHv2 Secure Shell | ||
SNMP v3 encrypted management | ||
Security IP login through Telnet | ||
Hierarchical management and password protection of users | ||
Network security | User-based MAC and ARP traffic examination | |
Restrict ARP traffic of each user and force-out user with abnormal ARP traffic | ||
Dynamic ARP table-based binding | ||
IP+VLAN+MAC+Port binding | ||
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet | ||
Port-based broadcast/multicast suppression and auto-shutdown risk port | ||
URPF to prevent IP address counterfeit and attack | ||
DHCP Option82 and PPPoE+ upload user’s physical location | ||
Plaintext authentication of OSPF、RIPv2 and BGPv4 packets and MD5 cryptograph authentication | ||
IP routing | IPv4 | ARP Proxy |
DHCP Relay | ||
DHCP Server | ||
Static route | ||
RIPv1/v2 | ||
OSPFv2 | ||
BGPv4 | ||
ECMP | ||
Strategy route | ||
Route policy | ||
MPLS/MPLS VPN/VPLS | ||
VxLAN/NVGRE/GENEVE | ||
IPv6 | MLD Snooping | |
IPv6 telnet | ||
DHCPV6 Snooping | ||
IPv6 ACL | ||
IPv6 Web management | ||
ospfv2/v3 | ||
ripv1/v2 | ||
pim-dm/pim-sm/pim-ssm | ||
igmp/igmp-proxy | ||
bgp4 | ||
mld/mld-proxy | ||
ldp/mpls | ||
DHCPv6 relay/Server/client | ||
isis4 | ||
Static route | ||
Vrrp | ||
mail-alarm | ||
syslog | ||
pppoeplus | ||
urpf | ||
sntp | ||
ping/ping6 | ||
Service features | ACL | Standard and extended ACL |
Time Range ACL | ||
Rate-limit on sending and receiving packet on port | ||
Packet redirection | ||
Port-based flow-control | ||
Two-speed three-color CAR | ||
Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame | ||
Packet filtration of L2~L7 even deep to 80 bytes of IP packet head | ||
QoS | Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow | |
Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark | ||
CAR(Committed Access Rate)、Traffic Shaping and flow statistics | ||
Packet mirror and redirection of interface and self-defined flow | ||
Super queue scheduler based on port and self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR. | ||
Congestion avoid mechanism,including Tail-Drop and WRED | ||
Multicast | IGMPv1/v2/v3 | |
IGMPv1/v2/v3 Snooping | ||
IGMP Filter | ||
MVR and cross VLAN multicast copy | ||
IGMP Fast leave | ||
IGMP Proxy | ||
PIM-SM/PIM-DM/PIM-SSM | ||
PIM-SMv6、PIM-DMv6、PIM-SSMv6 | ||
MLDv2/MLDv2 Snooping | ||
MSDP | ||
Reliability | Loop protection | EAPS and GERP (recover-time <50ms) |
Loopback-detection | ||
Link protection | FlexLink (recover-time <50ms) | |
RSTP/MSTP (recover-time <1s) | ||
LACP (recover-time <10ms) | ||
BFD | ||
Device protection | VRRP host backup | |
Double fault-tolerant backup of host program and configuration file | ||
1+1 power hot backup | ||
Maintenance | Network maintenance | Telnet-based statistics |
RFC3176 sFlow | ||
LLDP | ||
802.3ah Ethernet OAM | ||
RFC 3164 BSD syslog Protocol | ||
Ping and Traceroute | ||
Device management | Command-line interface(CLI), Console, Telnet and WEB configuration | |
System configuration with SNMPv1/v2/v3 | ||
RMON (Remote Monitoring)1/2/3/9 groups of MIB | ||
NTP(Network Time Protocol) | ||
GN.LinkⅡ Server | ||
NGBNView network management | ||
WEB-based network management | ||
Ping and Traceroute |
Brand |
---|
Related products
-
Mikrotik CCR1009-7G-1C-1S+ 7 Port Ethernet Router
1৳Add to cartNo switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.
100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
Call for Price
-
MIKROTIK CCR1036-8G-2S+EM Cloud Core Router
1৳Add to cartProduct Code: OTC2810
The CCR1036-8G-2S+ is a high-performance networking router with eight Gigabit ports, two SFP+ ports for 10G connectivity, and dual power supplies for redundancy. Powered by a 36 core CPU, this router is able to perform the most complicated routing and management tasks, for managing large networks with high bandwidth requirements.
Each of it’s ports is directly connected to the Tilera networking CPU, with no ports sharing any bandwidth, guaranteeing the best performance and highest reliability. The CPU supports IPsec hardware accelerated encryption, so you can use it also as a high performance VPN gateway to ensure the best encryption between important locations, without sacrificing connection speed.
The M.2 slot allows to install a high speed SSD disk, for using a local user database, proxy storage or for other features. Two versions are available, depending on the required RAM amount: 4 GB for CCR1036-8G-2S+ and 8 GB for CCR1036-8G-2S+EM.
Comparing to the previous model, the new CCR1036 series has a full-size USB port, redundant power supplies with improved design, RJ45 serial port, and general improvements in durability, efficiency and reliability.
Call for Price
-
Mikrotik RB450GX4 Gigabit Ethernet Router
1৳Add to cartThe Mikrotik RB450Gx4 Ethernet router is an Ethernet router with five Gigabit Ethernet ports, a serial port, 512 MB NAND memory and a microSD card slot. In addition, it supports full 10 V – 57 V input by two power jacks or PoE (802.3af/ at or passive PoE) and can provide PoE output for Ethernet port #5.
It is powered by MikroTik RouterOS. It comes without an enclosure, you are free to use it in your own. The device form factor is identical to our previous RB850 and RB450 series, so you can even use the same enclosures.
The device is powered by a quad core ARM CPU, has 1 GB of RAM and supports hardware IPsec encryption. The device is powered by RouterOS – the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager.
Call for Price
-
DTECH 1X8 Audio & Video HDMI Splitter Box
6,000৳Add to cart- Protected by a dust cap, plug, and play
- Designed with a black matte finish
- A new environmentally-friendly rubber compound
- Made of high-purity oxygen-free copper core, 3+6 core.
- Long-distance transmission.
- Supports 1080P and other digital signals.
Reviews
There are no reviews yet.