ITC T-67120 Rack Mount Network Audio Adapter - Olefins BD

Cart

Your Cart is Empty

Back To Shop

ITC T-67120 Rack Mount Network Audio Adapter

86,000৳ 

  • Standard rack mount design and it’s in brushed aluminum case.
  • It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
  • It’s built in DSP so that it could process information quickly and start up less than 1s.
  • It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP, IGMP, which achieve transmitting stereo audio in 16 bit in the network.
  • It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
  • With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
  • With 1 EMC input with highest priority.
  • With 1 AUX output to connect external power amplifier.
  • With 1 3-wire forced switching output for volume control.
  • Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa. And users could write program to control the power.
  • With function to preset the mute depth and the background music.
  • Support remotely unicast.
  • Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
  • Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
  • With authorization operation management system.
  • Support PSTN phone broadcast and SM voice broadcast.
  • Support on demand unicast via Wifi and IR remote controller.
  • Support spare line design for power supply at DC 24V
  • With indicator to display status, level, protection, standby, etc.
  • Support PC to modify its IP address via its serial port.
  • This IP PA system adopt common network design so that the installation is convenient.
  • Standby power is less than 3W.

ITC T-67120 Rack Mount Network Audio Adapter Specs:

Power Output 120W
Speaker Output 70V, 100V & 4-16ohms
Network Input Standard RJ45
Protocol Support TCP/IP, UDP, IGMP
Audio Formats MP3/MP2
Sampling Rate 8K~48KHz
Bit Rate 8K~512Kbps
Transmit Speed 10Mbps
Audio Format 16 digit stereo CD-level
Frequency Response 60-18KHz(+1dB, -3dB)
THD THD ≤ 0.1%
S/N Ratio ≥65dB
Aux Input 350mV
Mic Input 10mV
EMC input 775mV
Power Consumption 90W
Standby Power Consumption <3W
Protection High temp, overload and short-circuit
Working temp 5 ℃~40℃
Humidity 20%~80%
Power Supply ~110V/60Hz or ~230V/50Hz
Dimensions 484x303x88mm
Weight 10Kg

# Check Networking Products

Brand

Reviews

There are no reviews yet.

Be the first to review “ITC T-67120 Rack Mount Network Audio Adapter”

Your email address will not be published. Required fields are marked *

Cart

Your Cart is Empty

Back To Shop