ITC T-67500 Rack Mount Network Audio Adapter
SKU:68,000৳
IP network Amplifier with built-in 500W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
ITC T-67500 Rack Mount Network Audio Adapter Specs:
| Power Output | 500W | |
| Speaker Output | 70V, 100V & 4-16ohms | |
| Network Input | Standard RJ45 | |
| Protocol Support | TCP/IP, UDP, IGMP | |
| Audio Formats | MP3/MP2 | |
| Sampling Rate | 8K~48KHz | |
| Bit Rate | 8K~512Kbps | |
| Transmit Speed | 10Mbps | |
| Audio Format | 16 digit stereo CD-level | |
| Frequency Response | 60-18KHz(+1dB, -3dB) | |
| THD | THD ≤ 0.1% | |
| S/N Ratio | ≥65dB | |
| Aux Input | 350mV | |
| Mic Input | 10mV | |
| EMC input | 775mV | |
| Power Consumption | 90W | |
| Standby Power Consumption | <3W | |
| Protection | High temp, overload and short-circuit | |
| Working temp | 5 ℃~40℃ | |
| Humidity | 20%~80% | |
| Power Supply | ~110V/60Hz or ~230V/50Hz | |
| Dimensions | 484x303x88mm | |
| Weight |
|
| Brand |
|---|
Related products
-
ITC T-120B Mixer Amplifier
42,800৳Add to cartProduct Code: OTC2417
The professional public addressing mixer amplifier mode: T- 120 b is a 120-watt professional public addressing amplifier. The amplifier features phantom power inputs, where microphones can be operated from phantom power (power from the amplifier) and no additional cells and batteries are required for the operation of microphones.
In addition, 3 microphone inputs, 2 Auxiliary inputs, and 1 emergency inputs. Priority muting is achieved via EMC1 for overriding other inputs except for Mic1 on the front panel. The amplifier is equipped with a matching line transformer of 70V and 100 V and low impedance 4-16 ohms speaker outputs. The extensive protective circuit from short circuit, overload, and high temperature are provided in each amplifier.
-
ITC T-67240 Rack Mount Network Audio Adapter
98,000৳Add to cartIP network Amplifier with built-in 240W amplifiers
> Directly receives streaming audio via the Internet and transmits to 70V, 100V and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
-
ITC T-6216 16 Channel Power Sequencer
34,500৳Add to cart1) In standard 2U Cabinet; the black panel is in the material of alumina; user-friendly design; sophisticated technique;
2) ITC T-6216 includes 16-channels power output whose voltage and current is AC 230V/10A;
3) With an electronic lock switcher, the user could turn on/off the 16 channel power output manually; the device could work with a timer or intelligent controller to realize automation;
4) The interval time of power output, in turn. -
ITC T-1S01 Mixer Pre-Amplifier
29,600৳Add to cartProduct Code: OTC2398
- 5-channel MIC input and 3-channel Aux input.
- With 1-channel EMC input.
- Independent volume control, MASTER volume control.
- ITC T-1S01 comes with a compulsive insert and Priority function.
- MIC balance input interface with phantom power.
- Individual Gain controls for MIC
- EMC has priority over all inputs except MIC 2
- Bass and Treble Tone Controls
- AC 110V or 230V and DC 24V operation
Reviews
There are no reviews yet.