BOSCH PRS 2P250 Presadio Power Amplifiers
SKU:280,000৳
- BOSCH PRS 2P250 presadio power amplifiers 1, 2, 4, or 8 audio outputs (selection from 100/70/50 V outputs)
- Audio processing and delay for each amplifier channel
- Amplifier supervision and spare amplifier switching
- Loudspeaker line and loudspeaker supervision (LBB 4428/00 only line supervision)
- Eight control inputs and 1, 2, 4, or 8 control outputs
BOSCH PRS 2P250 Presadio Power Amplifiers Specs:
There are four types of Power Amplifier units in the Praesideo product range. These differ in the number of amplifier channels per frame: one, two, four, or eight.
The overall power rating is 500 watts for all of the amplifiers.
The Power Amplifiers can be set to 100 V, 70 V, and 50 V output tapping.
They have short-to-ground and short-circuit detection functions, and can generate their own pilot tone for supervision purposes. (Download Catalog)
| Brand |
|---|
Related products
-
ITC T-6760 Rack Mount Network Audio Adapter Power Amplifier
104,160৳Add to cart- IP network audio adapter built-in digital class-D 60W, 120W, 240W & 350W amplifier.
- Direct to receive internet audio source and transmit to 70V, 100V, and low impedance loudspeakers.
- Non-dedicated network system solution.
- Could be installed anywhere of the LAN network.
- Economy network audio solution for multiple speaker applications.
- With a 3.4 inch LCD screen humanized operation interface.
- Zone definition is done through software, each network audio adapter could be regarded as one zone, or several audio adapters could be taken as one zone, moreover, several zones could be defined as a group for synchronous operation.
- One Aux input and one local microphone input, both with volume control.
- Remote control over IP address change and write-in, volume control, and local program selection from the server.
- Voice evacuation system with higher priority and local input with secondary priority. Moreover, the local input and program source priority could be customized
-
ITC T-67350 Rack Mount Network Audio Adapter
65,000৳Add to cartIP network Amplifier with built-in 350W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
-
BOSCH LBB 1990/00 Plena Voice Alarm Controller
228,000৳Add to cartThe Plena LBB 1990/00 Voice Alarm Controller unit, is the heart of the voice alarm system. It is the basis of the Plena Voice Alarm System and has all the essential functionality for compliance with the EN54‑16 and EN60849 standards, including full system supervision, loudspeaker line impedance supervision, a supervised emergency microphone on the front panel, and a supervised message manager.
The LBB1990/00 enables messages to be merged to allow even more flexible use of pre-recorded announcements and evacuation messages. The controller can be used as a stand-alone system with up to six zones or expanded to up to 120 zones using additional six-zone routers.
Up to eight call stations can be connected. Interconnections are made using standard RJ45 connectors and shielded CAT-5 cable.
A built-in 240 W amplifier provides the power for the emergency call channel and BGM. Additional Plena Amplifiers can be added to provide two-channel operation. All amplifiers are supervised. The audio output uses standard analog audio 100 V line switching for full compatibility with the Plena family of public address equipment and Bosch EVAC-compliant loudspeakers. The system is configured using DIP switches for basic functionality and a PC for more advanced functions.
- Basic 6 zone system
- Expandable to 60 zones
- Up to 8 call stations can be connected
- Built-in 240 watt booster amp
- Digital message system
- Up to 255 pre-recorded messages and chimes/tones can be stored
- The emergency mic on the front panel
- 16 priority levels
- Individual BGM control for each zone
- Standard and emergency control in and outputs
- Additional Booster amps are supervised
- Can be set up using PC or via DIP switches
- Fully complies with IEC60849 and all national equivalents
-
ITC T-7800A IP Network PA & Intercom System Software
407,000৳Add to cart1) Using CPU Core i7, which could support up to 1,000 terminals;
2) Using dual-channel memory 8G DDR3;
3) Using high speed 256G SSD
4) With dual network interface to meet the demand of high speed data exchange;
5) Using 17-inch 16:9 HD screen of 1920x1080P, which is with LVDS digital interface;
6) With pull-style industrial level keyboard;
7) Using industrial level touch mouse;
8) Using 2 channel sound card, which could be expanded to 14 channel;
Reviews
There are no reviews yet.