Your Cart is Empty

Back To Shop

ZTKeco INBIO260 IP-Based Door Access Control



ZTKeco INBIO260 IP-Based Door Access Control InBio carries out the matching of fingerprints on the panel, itself. The FR Series of readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a database.

InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modification of network parameters directly and easily. InBio controller firmware can be upgraded in the field. InBio panels stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events/transactions. InBio is backed up in real-time to an onboard SD card. Data is preserved if power is lost.

InBio continues to operate if the network connection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxiliary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.

InBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in optimized system architecture. Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxiliary Input/Output Linkages are built into the InBio controller’s firmware. Be sure to inquire about ZKAccess options that can further reduce your InBio installation time and labor, including.

ZTKeco INBIO260 IP-Based Door Access Control Spec:

InBio-160 InBio-260 InBio-460
Number of doors controller 1 Door 2 Door 4 Door
Numbers of readers supported 4(2 RS-485 Reader, 2 26-bit wiegand reader) 8(4 RS-485 Reader, 4 26-bit wiegand reader) 12 (8 RS-485 Reader, 4 26-bit wiegand reader)
 Types of readers supported  26-bit Wiegand and RS485 FR Series Reader  26-bit Wiegand and RS485 FR Series Reader  26-bit Wiegand and RS485

FR Series Reader

 Number of Inputs  3(exit Device and Door Status, 1 AUX)  6( 2 Exit Device, 2 Door Status, 2 AUX)  12( 4 Exit Device,

4 Door Status, 4 AUX)

 Number of Outputs  2 (1-Form C Relay for Lock and One Form C Relay for Aux Output)  4 (2-Form C Relay for Lock and 2-Form C Relay for Aux Output)  8 (4-Form C Relay or Lock and 4-Form C Relay for Aux Output)
 Card holders Capacity  30,000  30,000  30,000
 Fingerprint Capacity  3,000  3,000  3,000
 Log Events Capacity  100,000  100,000  100,000
 Communication  TCP/IP, RS-485 and WiFi optional TCP/IP, RS-485 and WiFi optional  TCP/IP, RS-485 and WiFi optional
 Package Dimension  350(L)×90(H)×300(W)mm  350(L)×90(H)×300(W)mm  350(L)×90(H)×300(W)mm
 Package Weight  3.6kg  3.6kg  3.7kg
 CPU  32 bit 400MHz CPU  32 bit 400MHz CPU  32 bit 400MHz CPU
 RAM  32M  32M  32M
 Flash Memory  128M  128M  128M
 Power  9.6V-14.4V DC  9.6V-14.4V DC  9.6V-14.4V DC
 Operating Temp  0-45 °C  0-45 °C  0-45 °C
 Operating Humidity  20% to 80%  20% to 80%  20% to 80%

# Check Access Control Package

# Check Access Control Products

# Check Guard Patrol System



There are no reviews yet.

Be the first to review “ZTKeco INBIO260 IP-Based Door Access Control”

Your email address will not be published. Required fields are marked *


Your Cart is Empty

Back To Shop