Category
- Access Control
- Access Control Package
- Accessories
- Adapters and Connectors
- Agro
- Astronomical Equipment
- Audio Accessories
- Bangla Quran Speaker
- Barcode Scanner
- Battery and Accessories
- Best Speaker
- Blackmagic Design
- Call Station
- Camera
- Capture Devices
- Car Checking System
- CCTV & Accessories
- Classroom Sound System
- Conference System
- Dash Camera
- Document Camera
- Elevator Controller
- Forklift
- GNSS Receiver and Accessories
- Guard Patrol System
- Lighting System
- Medical Equipment
- Megaphone
- Memory & HDD
- Metal Detector
- Microphone
- Microphone Foam Cover
- Microscope/Binocular
- Mosque Sound Solution Package
- Networking Products
- OLT Products
- PA
- PA Amplifier
- PA System
- PABX System
- Paperless Conference System
- Passport Scanner
- Podium System
- Portable Amplifier
- POS Terminal Device
- Power Supply
- Printer
- Projector
- PTZ Camera
- Repeater
- RFID Accessories
- Router
- Safety Products
- Security Products
- Smart Board Bangladesh
- Smart Door Lock
- Spill Kit
- Studio & ENG Camera
- Tools & Equipment
- Traffic Equipment
- Turnstile Gate
- VHF & UHF Antennas
- Video Conference
- Video Intercom System
- Walk Through Metal Detector
- Walkie Talkie
- Walkie-Talkie Battery & Accessories
- Wireless Conference System
- Wireless Guide System
- Wireless Products
- X-Ray Baggage Scanner
- Zoom Software
Blackmagic Design ATEM Streaming Bridge
SKU:30,000৳
- For Any ATEM Mini Pro Streaming Switcher
- HDMI and SDI Outputs
- Up to 1080p60 Resolution Output
- Direct, Network, and Internet Connection
- IP Addressable, Software Controllable
Blackmagic Design ATEM Streaming Bridge Specs:
The Blackmagic Design ATEM Streaming Bridge for ATEM Mini Pro Streaming Switchers allows you to convert the IP signal from any ATEM Mini Pro unit into SDI and HDMI video. It features two SDI outputs and a single HDMI output and supports resolutions up to 1080p60.
You can connect the Streaming Bridge directly to the streaming output of your ATEM Mini Pro, and it will provide SDI and HDMI output for use in broadcast environments, or directly to a monitor. You can also connect the streaming bridge to the same LAN that an ATEM Mini Pro is connected to, and the devices will find each other allowing you to easily stream across the network.
The downloadable software enables you to control the decoding settings as well as set an IP address to the device and save that information to your computer. That information can be emailed to any computer connected to an ATEM Mini Pro, and this allows the ATEM Mini Pro to locate and stream to the Streaming Bridge connected to the internet.
Blackmagic Design ATEM Streaming Bridge is a video converter that lets customers receive an H.264 stream from any ATEM Mini Pro and convert it back to SDI and HDMI video. This means customers can send video to remote locations around their local Ethernet network, or via the internet globally.
That’s possible because it uses advanced H.264 codecs for higher quality at very low data rates. Imagine broadcasters and bloggers collaborating on shows and creating global networks of ATEM Mini Pro remote broadcast studios. Setup is easy as the ATEM software utility can create setup files that customers can email to remote ATEM Mini Pro studios. ATEM Streaming Bridge is the perfect way to use ATEM Mini Pro as a remote broadcast studio.
ATEM Mini switchers make it easy to create professional multi-camera productions for live streaming to YouTube and innovative business presentations using Skype or Zoom. Simply connect ATEM Mini and customers can switch live between 4 high-quality video camera inputs for dramatically better quality images.
Or connect a computer for PowerPoint slides or gaming consoles. The built-in DVE allows exciting picture in picture effects, perfect for commentary. There are loads of video effects too. All ATEM Mini Pro models have live streaming which can be used to connect directly to the ATEM Streaming Bridge. There’s also HDMI out for projectors. Microphone inputs allow high-quality desktop and lapel mics for interviews and presentations.
Audio Input Connectors | None |
Video Output Connectors | 2 x BNC (3G-SDI / HD-SDI) 1 x HDMI (HDMI 1.4) |
Output Video Format | HDMI 1080p: 23.98/24/25/29.97/30/50/59.94/60 fps 1080i: 50/59.94/60 fps SDI (10-Bit 4:2:2 YUV) 1080p: 23.98/24/25/29.97/30/50/59.94/60 fps 1080i: 50/59.94/60 fps |
Audio Output Connectors | None |
Video Standard Compliance | SMPTE 259M/292M/296M/424M-B/425M-A/425M-B |
Other I/O | 1 x RJ45 2 x BNC Reference |
Expansion Slots | None |
Video IP Decoding | H.264: 1920 x 1080 |
Power Connector | 1 x Barrel (6 to 30 VDC) Input |
Power Consumption | Device: 6 W |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Storage Temperature | -4 to 140°F / -20 to 60°C |
Operating Humidity | 0 to 90% (Recommended) |
Certifications | CE, FCC, Kcc, as per Manufacturer |
Dimensions | 5.28 x 3.63 x 0.9″ / 13.41 x 9.22 x 2.29 cm |
Weight | 8.1 oz / 230 g |
Warranty Length | Limited 1-Year Warranty |
# Check Blackmagic Design ATEM Mini HDMI Live Stream Switcher
Brand |
---|
Related products
-
Blackmagic Design ATEM Mini HDMI Live Stream Switcher
60,000৳Add to cartDesigned for multicamera live streaming to the internet or broadcast applications, the compact ATEM Mini from Blackmagic Design provides gaming consoles, corporate computer streams, or HD cameras a four-input live production switcher with an integrated control panel. The four HDMI inputs are available on the rear.
- 4-Channel Live Stream HDMI Switcher
- Input/Output up to 1080p60 10-Bit 4:2:2
- 2-Channel Digital Audio Mixer
- HDMI Output, Ethernet ATEM Control
Reviews
There are no reviews yet.