MIKROTIK CCR1036-8G-2S+EM Cloud Core Router
SKU:1৳
Product Code: OTC2810
The CCR1036-8G-2S+ is a high-performance networking router with eight Gigabit ports, two SFP+ ports for 10G connectivity, and dual power supplies for redundancy. Powered by a 36 core CPU, this router is able to perform the most complicated routing and management tasks, for managing large networks with high bandwidth requirements.
Each of it’s ports is directly connected to the Tilera networking CPU, with no ports sharing any bandwidth, guaranteeing the best performance and highest reliability. The CPU supports IPsec hardware accelerated encryption, so you can use it also as a high performance VPN gateway to ensure the best encryption between important locations, without sacrificing connection speed.
The M.2 slot allows to install a high speed SSD disk, for using a local user database, proxy storage or for other features. Two versions are available, depending on the required RAM amount: 4 GB for CCR1036-8G-2S+ and 8 GB for CCR1036-8G-2S+EM.
Comparing to the previous model, the new CCR1036 series has a full-size USB port, redundant power supplies with improved design, RJ45 serial port, and general improvements in durability, efficiency and reliability.
Call for Price
MIKROTIK CCR1036-8G-2S+EM Cloud Core Router Specs:
| Product code | CCR1036-8G-2S+EM |
| SFP DDMI | Yes |
| CPU nominal frequency | 1.2 GHz |
| CPU core count | 36 |
| Architecture | TILE |
| Size of RAM | 16 GB |
| 10/100/1000 Ethernet ports | 8 |
| Number of USB ports | 1 |
| Memory Cards | 1 |
| Memory card type | microSD |
| Power Jack | 1 |
| Supported input voltage | 18 V – 28 V |
| Voltage Monitor | Yes |
| CPU temperature monitor | Yes |
| PCB temperature monitor | Yes |
| Dimensions | 355x145mm55mm |
| Operating System | RouterOS |
| Operating temperature range | -20C .. +60C |
| License level | 6 |
| Current Monitor | Yes |
| CPU | TLR4-03680CG-12CE-A3b |
| SFP+ ports | 2 |
| USB slot type | microUSB type AB |
| Serial port | RS232 |
| Storage type | NAND |
| Storage size | 1 GB |
| Brand |
|---|
Related products
-
Mikrotik CCR1036-8G-2S+EM Ethernet Port
1৳Add to cartProduct Code: OTC2809
The new Mikrotik CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available individually). It use the same 36 core Tilera CPU as our other CCR1036 model, and offers the same performance, but now, ten gigabit links are probable.
The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit Ethernet ports, a serial console cable and a USB port. The CCR1036-8G-2S+ has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). Also available now, the EM model with 4GB of RAM! It supports both SFP (1.25G) and SFP+ (10G) modules.
Call for Price
-
Mikrotik CCR1036-12G-4S-EM Cloud Core Router
1৳Add to cartProduct Code: OTC2817
Mikrotik CCR1036-12G-4S-EM is an industrial-class router with a cutting-edge 36 core CPU. Unprecedented power and unbeatable performance. This device built-in in a 1U rackmount case, has (4) SFP ports, (12) Gigabit Ethernet ports, a serial console cable, and a USB port.
The CCR1036-12G-4S-EM has (2) DDR3 SODIMM slots, has no memory limit in RouterOS, and now equipped with dual redundant power supplies, full-size type-A USB (instead of micro USB), high-speed M.2 storage connector, and onboard 8GB of RAM
Call for Price
-
VSOL EPON 1GE ONU (BOSA) Router
1,600৳Add to cartProduct Code: OTC2826EPON is the latest generation of access network technology. IEEE802.3ah is the standard protocol of EPON. The EPON standard differs from other PON standards in that it achieves higher bandwidth and higher efficiency using larger variable-length packets. EPON offers efficient packaging of user traffic with frame segmentation allowing higher quality of service (QOS) for delay-sensitive voice and video communications traffic.EPON networks provide the reliability and performance expected for business services and provide an attractive way to deliver residential services. EPON enables Fiber To The Home (FTTH) deployments economically resulting in accelerated growth worldwide.based on ZTE high-performance PON access chip. The chip supposes three mode：GPON/EPON/P2P comply with the 802.3-2005 CTC EPON equipment technical requirements have good PON interoperability compatibility.Provide one GE auto-adapting Ethernet ports. The features high-performance forwarding capabilities to ensure an excellent experience with Internet and HD video services. Therefore the provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with third-party OLT such as Huawei/ZTE/Fiberhome.Call for Price
Reviews
There are no reviews yet.