Bosch DCNM-WLIION Battery Pack for DCNM-WD
SKU:- 24 hours typical use from a full charge
- Fully recharges in less than 3 hours
- Lithium‑ion technology
- Built‑in microprocessor controls charging cycle
- Long service life without charge degradation
- 12800 mAh, 7.5 Vdc
Call for Price
Bosch DCNM-WLIION Battery Pack for DCNM-WD Specs:
The Bosch DCNM-WLIION is a removable, rechargeable lithium-ion battery pack for use with the Bosch Dicentis wireless discussion devices – DCNM-WD & DCNM-WDE. The battery fully charges within 3 hours and gives 24 hours use in the standard wireless device and 20 hours use in the extended device. A microprocessor controls the charging current to prevent current overload and a push-to-test button on the DCNMWLIION enables the user to test the remaining battery capacity/time.
| Nominal Output Voltage | 7.5 VDC |
| Capacity | 12800 mAh |
| Dimensions (H x W x D) | 99.9 x 136.5 x 22 mm(3.93 x 5.37 x 0.87 in) |
| Weight | 1774 g (3.9 lb) |
| Color | Charcoal |
| Operating temperature | 5 ºC to +45 ºC(41 ºF to +113 ºF) |
| Advised storage temperature | -5 ºC to +35 ºC(23 ºF to +95 ºF) |
| Relative humidity | <75 %, >5 % |
Related products
-
BOWAY MC-248 Snake Cable
1৳Add to cart- A balanced speaker cable consists of three main components
- The conductors (internal wires, or cores) carry the signal
- the shielding, which helps protect the integrity of the information passing through and in the case of a microphone cable.
- Three-pronged connectors (XLR) that allow the connection.
-
BOSCH PLE1MA060 Mixer Amplifier
51,000৳Add to cartThe BOSCH PLE1MA060 mixer amplifier is a 60-watt public address amplifier suitable for 100-volt line commercial audio systems as well as low impedance sound systems using 8-ohm loudspeakers. From the Plena range of mixer amplifiers, the Bosch PLE1MA060 is built to a high quality and features excellent sound and speech intelligibility thanks to a smart equalizing approach and built-in limiters.
Easy to use, with simple zone labels included in the box as well as setting indicators which enable the installer to place colored markers on the volume and tone controls to indicate optimum and maximum recommended volume settings.
Despite its simplicity, the PLE 1MA060 still has flexible features such as ducking, priority paging, and voice-activated emergency override. 19″ rack mounting brackets are included should you wish to build into a 19″ equipment rack.
- 60 watt, 100-volt line
- Also compatible with 8-ohm speakers
- 4 low noise balanced inputs for mic or line with phantom power
- 3 separate line inputs
- Further 100-volt input and Telephone input with priority
- RJ45 connection for remote wall plate WP3S2Z (see ancillary section)
- Contact closure and Vox priority
- Built-in chime for announcements
- Zone labeling and setting indicator pins
- Smart equalizing
- AC and 24VDC operation
- LED VU Meter
- 19″ rack mount brackets included
Reviews
There are no reviews yet.