Bosch DCNM-WLIION Battery Pack for DCNM-WD
SKU:- 24 hours typical use from a full charge
- Fully recharges in less than 3 hours
- Lithium‑ion technology
- Built‑in microprocessor controls charging cycle
- Long service life without charge degradation
- 12800 mAh, 7.5 Vdc
Call for Price
Bosch DCNM-WLIION Battery Pack for DCNM-WD Specs:
The Bosch DCNM-WLIION is a removable, rechargeable lithium-ion battery pack for use with the Bosch Dicentis wireless discussion devices – DCNM-WD & DCNM-WDE. The battery fully charges within 3 hours and gives 24 hours use in the standard wireless device and 20 hours use in the extended device. A microprocessor controls the charging current to prevent current overload and a push-to-test button on the DCNMWLIION enables the user to test the remaining battery capacity/time.
| Nominal Output Voltage | 7.5 VDC |
| Capacity | 12800 mAh |
| Dimensions (H x W x D) | 99.9 x 136.5 x 22 mm(3.93 x 5.37 x 0.87 in) |
| Weight | 1774 g (3.9 lb) |
| Color | Charcoal |
| Operating temperature | 5 ºC to +45 ºC(41 ºF to +113 ºF) |
| Advised storage temperature | -5 ºC to +35 ºC(23 ºF to +95 ºF) |
| Relative humidity | <75 %, >5 % |
Related products
-
BOSCH LBB1938 Power Amplifier
133,000৳Add to cartThe Bosch LBB 1938/20 is a powerful 480 W power amplifier in a 3U high 19”case for rack mounting or tabletop use.
LEDs on the front panel of the LBB1938/20 show the status of the amplifier: power, audio output level, and supervised functions.
This high performance unit fulfills a wide range of public address requirements at a surprisingly low cost.
There are two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not get any announcements made via the priority input.
Rack mounting brackets supplied.
- 480 watts
- Very high audio performance power amp
- Can be used to boost Plena Voice alarm systems with system monitoring
- XLR and jack input with XLR and Jack loop through outputs
- 100 volt line input. Ideal for remote location booster amps
- 100v, 70v and 8 ohm outputs
- 24v override relay output
- Temperature controlled fan
- AC and 24VDC operation
- LED VU Meter
- Dual inputs with priority switching
- Temperature controlled forced front to back
- Mains, battery back-up, and pilot tone supervision
- TÜV certified according to IEC 60849
-
BOWAY BW-178 Long-Lasting Microphone Cable
1৳Add to cart- A balanced microphone cable consists of three main components
- The conductors (internal wires, or cores) carry the signal
- the shielding, which helps protect the integrity of the information passing through and in the case of a microphone cable.
- Three-pronged connectors (XLR) that allow the connection.
Reviews
There are no reviews yet.