BOSCH LBB 1990/00 Plena Voice Alarm Router
SKU:120,000৳
The Bosch LBB 1992/00 Plena Voice Alarm Router is an expansion unit that can add six zones and 12 input contacts to the Voice Alarm System. It can use the built-in amplifier on the LBB 1990/00 Voice Alarm Controller and provides inputs and outputs for one or two amplifiers in a multi-amplifier one or two-channel system. The LBB1992/00 provides dual-channel operation for calls and BGM simultaneously to a maximum of six different zones, using two Plena amplifiers.
Additionally, the single-channel operation is possible with only one Plena amplifier. Multiple routers can also share one amplifier, including the internal amplifier on the controller unit. It is possible to use any number of amplifiers from one up to the number of routers used.
- The controller supports A/B wiring.
- Expand the voice alarm system with six zones
- EN 54‑16 certified and EN 60849 compliant
- 12 additional input contacts
- Six volume override output contacts
- Supervision within the Plena Voice Alarm System
- Up to 9 routers can be used
- Same functionality as the system controller
- Uses System controllers built-in amp or additional Plena booster amps
BOSCH LBB 1990/00 Plena Voice Alarm Router Specs:
- Voltage: 230/115 VAC, ±10%, 50/60 Hz
- Inrush curren: t 1.5 A @ 230 VAC / 3 A @ 115 VACMax power consumption: 50 VA
- Idle / max load* current: 0.2 A / 0.3 A
- Voltage: 24 VDC, +15% / -15%
- Current max: 1.8 A
- Typical / max load* current: 0.51 A / 1.5 A
- Trigger Inputs: 12 x (6 EMG, 6 business)
- Connectors: MC1,5 / 14-ST-3,5
- Activation: Programmable
- Supervision: On EMG inputs, programmable
- Supervision method: Series / parallel resistor
- Connector: MSTB 2,5 /16-ST
- Amp 1: 100 V / 70 V / 0 V
- Amp 2: 100 V / 0 V
- Power handling capacity: 1000 W
- Loudspeaker outputs: 12 x (2 x 6 zones)
- Connectors: MSTB 2,5 /16-ST, floating
- 100 V output: 700 W rated per zone
- Volume override types: 3-wire, 4-wire (24 V), 4-wire failsafe
- Connector: MC 1,5/14-ST-3,5
- Rating: 250 V, 7A, voltage-free
- General-purpose relays (2x): NO / COM
- Maximum load means the maximum load on 24 VDC, and indicator tests.
- Dimensions (H x W x D): 88 x 430 x 260 mm / (19″ wide, 2U high)
- Weight Approx.: 3 kg
- Mounting: Standalone, 19” rack
- Color: Charcoal
| Brand |
|---|
Related products
-
ITC T-7800A IP Network PA & Intercom System Software
407,000৳Add to cart1) Using CPU Core i7, which could support up to 1,000 terminals;
2) Using dual-channel memory 8G DDR3;
3) Using high speed 256G SSD
4) With dual network interface to meet the demand of high speed data exchange;
5) Using 17-inch 16:9 HD screen of 1920x1080P, which is with LVDS digital interface;
6) With pull-style industrial level keyboard;
7) Using industrial level touch mouse;
8) Using 2 channel sound card, which could be expanded to 14 channel;
-
ITC T-67500 Rack Mount Network Audio Adapter
68,000৳Add to cartIP network Amplifier with built-in 500W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
-
ITC T-6760 Rack Mount Network Audio Adapter Power Amplifier
104,160৳Add to cart- IP network audio adapter built-in digital class-D 60W, 120W, 240W & 350W amplifier.
- Direct to receive internet audio source and transmit to 70V, 100V, and low impedance loudspeakers.
- Non-dedicated network system solution.
- Could be installed anywhere of the LAN network.
- Economy network audio solution for multiple speaker applications.
- With a 3.4 inch LCD screen humanized operation interface.
- Zone definition is done through software, each network audio adapter could be regarded as one zone, or several audio adapters could be taken as one zone, moreover, several zones could be defined as a group for synchronous operation.
- One Aux input and one local microphone input, both with volume control.
- Remote control over IP address change and write-in, volume control, and local program selection from the server.
- Voice evacuation system with higher priority and local input with secondary priority. Moreover, the local input and program source priority could be customized
-
ITC T-77120 Rack Mount Network Audio Adapter
1৳Add to cart1) Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.
2) 3.4 inch industrial-grade LCD screen, super anti-jamming performance, avoid instability infrared operation, clearly show most lattice pattern, and the machine working status.
3) Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time less than 1 second.
4) Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP(IP multi-Cast protocol), could transmit 16 bits stereo CD audio sign.
5) Built-in Hi-Fi analog amplifier,60W/120W/240W/350W/500W, 4-16Ω output and and constant voltage 70V-100V output.
6) One AUX and one MIC input, with independent volume control, treble and bass control, support paging without network
Reviews
There are no reviews yet.