BOSCH LBB 1965/00 Plena Message Manager
SKU:117,000৳
The Plena message manager is a high-performance, highly versatile stand-alone digital message player. Applications range from spot announcements in supermarkets and theme parks to warning and evacuation messages in emergency situations.
BOSCH LBB 1965/00 Plena Message Manager Specs:
Messages
Up to 12 messages can be stored in the internal 64Mbit EEPROM, without the need for data retention battery backup. Each message can have any length within the total available capacity. A PC uploads messages and configurations via RS-232 to the unit, which can then operate without a PC.
The standard WAV format is used for messages with sample rates of 8 kHz to 24 kHz with 16-bit word length (linear PCM). This gives up to 500 seconds of recording time with a CD‑quality signal-to-noise ratio. The use of linear PCM instead of a compressed audio format, such as MP3, ADPCM, and u-law/A-law, ensures high-quality playback of all types of audio signals, including sound effects and special tones, such as attention chimes.
The unit has 12 contact closure trigger inputs for announcements. Each can be configured for a sequence of up to four messages from those available. In this way messages can be used in combination with other messages, optimizing flexibility, and storage space usage. When used together with the six-zone LBB 1925/10 Plena System Pre-Amplifier, a zone selection can be configured for each trigger input. The message manager communicates this selection to the LBB 1925/10 via an RS-232 connection. Continuous activation of a trigger input causes the corresponding message sequence to repeat.
Trigger Inputs
The trigger inputs have a serial priority, i.e., input 1 has priority over input 2, input 2 over input 3, etc. The high-priority trigger inputs 1-6 are only accessible as contacts on the rear panel to prevent accidental use. The lower priority trigger inputs 7-12 are also available as trigger switches on the front panel.
Integrity and Dependability
The LBB 1965/00 can also play emergency/evacuation messages, as it fulfills the IEC 60849 standard. The microcontroller continually checks the data integrity of the system, and a watchdog circuit, in turn, checks the microcontroller. The unit monitors the D/A converter with a pilot tone and the high-priority trigger inputs (one to six) for cable short circuits and breaks. A 24 V battery backup connection with automatic fail-safe provides continued operation if the mains power should fail. A 20 kHz pilot tone can be mixed with the output signal to supervise the link to the next amplifier. This also works for loudspeaker supervision in combination with 20 kHz detectors. Any failure causes a red LED fault indication and activates a fault output contact.
Loop-through Facility
The LBB 1965/00 provides a loop-through facility with balanced XLR and unbalanced cinch inputs and outputs. This allows the unit to be inserted into an existing audio link. As long as no announcements are playing, the signal input is routed to the output. If an announcement begins, the input signal is interrupted and the announcement is routed to the output.
Updating
Messages and configuration settings are uploaded from a PC. After uploading, the trigger inputs 7-12 can be configured by using the front panel switches, without the need for a new upload or even a PC. Message content can be monitored using the available headphone jack.
Related products
-
BOSCH PLE1MA060 Mixer Amplifier
51,000৳Add to cartThe BOSCH PLE1MA060 mixer amplifier is a 60-watt public address amplifier suitable for 100-volt line commercial audio systems as well as low impedance sound systems using 8-ohm loudspeakers. From the Plena range of mixer amplifiers, the Bosch PLE1MA060 is built to a high quality and features excellent sound and speech intelligibility thanks to a smart equalizing approach and built-in limiters.
Easy to use, with simple zone labels included in the box as well as setting indicators which enable the installer to place colored markers on the volume and tone controls to indicate optimum and maximum recommended volume settings.
Despite its simplicity, the PLE 1MA060 still has flexible features such as ducking, priority paging, and voice-activated emergency override. 19″ rack mounting brackets are included should you wish to build into a 19″ equipment rack.
- 60 watt, 100-volt line
- Also compatible with 8-ohm speakers
- 4 low noise balanced inputs for mic or line with phantom power
- 3 separate line inputs
- Further 100-volt input and Telephone input with priority
- RJ45 connection for remote wall plate WP3S2Z (see ancillary section)
- Contact closure and Vox priority
- Built-in chime for announcements
- Zone labeling and setting indicator pins
- Smart equalizing
- AC and 24VDC operation
- LED VU Meter
- 19″ rack mount brackets included
-
BOSCH Plena PLE1CS Call Station
20,000৳Add to cartThe Plena PLE-1CS tabletop unidirectional condenser paging microphone is a high-quality call station with a sturdy metal base designed for use with the BOSCH PLE series of amplifiers. In addition to tabletop use, the special design enables the unit to be neatly flush-mounted.
The PLE1CS microphone features a large press to talk call button for ease of use and the flexible gooseneck enables the microphone to be positioned as required. A green LED confidence light illuminates to let you know the mic is in use.
- PTT-key for calls for activation
- Momentary or toggle
- Green LED, indicating microphone active
- Stable metal base design with fixed 2 m cable and lockable Euro-style connector
- Phantom powered by the amplifier
-
BOSCH LBC 3095/15 Pendant Sphere Speaker
10,400৳Add to cartProduct Code: OTC2194
The Bosch LBC 3095/15 is a pendant ball loudspeaker designed to be suspended from the ceiling via its connecting cable. Fitted with a 5.25″ driver, the LBC3095/15 is rated at 10 watts, 100-volt line. The LBC3095/15 is splash waterproof, rated IPx3, and suitable for outdoor use and in environments with high humidity levels such as swimming pools. Also ideal for use in buildings with high ceilings such as hypermarkets and superstores.
- Suitable for speech and music reproduction
- Simple power setting
- 5 m fixed connection cable
- Splash-waterproof
- Robust self-extinguishing ABS enclosure to UL 94 V0
- Complies with international installation and safety regulations
-
BOSCH PRS-2P250 Presadio Controller
235,000৳Add to cartThe Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
Reviews
There are no reviews yet.