BOSCH PVA 2P500 PAVIRO Power Amplifier
SKU:307,500৳
The BOSCH PVA 2P500 PAVIRO power amplifier is a 2 x 500 Watt professional audio Class D-amplifier for evacuation purposes. It can be operated from both the mains and a DC supply.
- Floating 100 V or 70 V power outputs
- High efficient amplifier blocks in class-D technology
- Outputs idling and short circuit-protected
- Mains operation 120–240 V (50/60 Hz) and/or 24 V DC emergency backup
- Electronically balanced inputs
- Temperature monitoring function
- Pilot tone and ground fault monitoring function via PVA-4CR12 controller or PVA-4R24 router
- Processor control of all functions
- Monitoring of the processor system via watchdog circuit
- Non-volatile FLASH memory for configuration data
- Internal monitoring function
- Integrated audio relays
- Line monitoring function
BOSCH PVA 2P500 PAVIRO Power Amplifier Sprecs:
The PVA 2P500 benefits from the lowest power consumption of any system in its class, minimizing running costs and requiring fewer backup batteries too. The system is extremely flexible and allows architecture changes at any time during installation and has a wide range of announcement/music combinations.
Ideal for small to medium-sized offices, regional airports, mid-sized hotels, factories, schools, and department stores. It can be operated from both the mains and a DC supply. The output voltage is galvanically insulated and is constantly monitored for a ground fault. An energy-saving mode and temperature-controlled fans reduce energy consumption and noise levels.
The control and monitoring functions are performed via CAN bus. This amplifier is designed for operation in an emergency evacuation system. The amplifiers are usually controlled via a controller and configured using IRISNet.
| Rated load impedance (output power) | |
| • 100 V | 20 Ω (500 W) |
| • 70 V | 10 Ω (500 W) |
| Rated output power, 1 kHz, THD ≤ 1% | 2 ✕ 500 W1 |
| Rated input voltage | +6 dBu |
| Max. RMS voltage swing, 1 kHz, THD ≤ 1%, without load | |
| • 100 V | 110 V |
| • 70 V | 78 V |
| Voltage gain, ref. 1 kHz, fixed | |
| • 70 V | 33.2 dB |
| • 100 V | 36.2 dB |
| Maximum load capacitance | 2 μF |
| Input level, max. | +18 dBu (9.75 Vrms) |
| Frequency response, ref. 1 kHz, rated load, -3 dB | 50 Hz to 25 kHz |
| Input impedance, active balanced | 20 kΩ |
| Signal-to-noise ratio (A-weighted) | > 104 dB |
| Output noise (A-weighted) | < -62 dBu |
| Crosstalk , ref. 1 kHz | < -85 dB |
| Output stage topology | Class-D, transformer, floating |
| Power requirements | |
| • AC | 115–240 V (-10/+10%)2 |
| • DC | 21‑32 V |
| Power consumption, AC and DC | See section “Power consumption” in the operation manual |
| Inrush current | 2A |
| Inrush current, after a five-second power cycle | 1.3A |
| Mains fuse | T6.3A (internally) |
| DC fuse | 30A (internally) |
| Ground fault | R < 50 kΩ |
| CAN-BUS port | 2 ✕ RJ-45, 10 to 500 kbit/s |
| Protection | Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains Undervoltage protection, DC supply Undervoltage protection, inrush current limiter, ground fault |
| Cooling | Front-to-rear, temperature-controlled fans |
| Operating temperature | -5 °C to +45 °C |
| Safety class | Class I |
| Electromagnetic environment | E1, E2, E3 |
| Product dimensions (Width ✕ Height ✕ Depth) | 19”, 2 HU, 483 ✕ 88.2 ✕ 391mm |
| Net Weight | 16.5kg |
| Brand |
|---|
Related products
-
ITC T-60M Mixer Amplifier
38,600৳Add to cartProduct Code: OTC2415
- 3 MIC inputs, 2 AUX inputs.
- 3 MIC volume control, 2 AUX volume control.
- ITC T-60M Mixer Amplifier with priority, MIC1 input is prior to other audio input.
- There is a separate treble and bass adjustment knob.
- One MIC2 / AUX1 selector switch, one MIC3 / AUX2 selector switch.
- Two types of power output: 4 ohms constant resistance, 8 ohms output, and constant voltage 70V, 100V output.
- Single-channel rated power 60W output.
-
Bosch PRS-1P500 Power Amplifier
195,000৳Add to cartThere are four types of Power Amplifier units in the Praesideo product range. These differ in the number of amplifier channels per frame: one, two, four, or eight. The overall power rating is 500 watts for all of the amplifiers. The Power Amplifiers can be set to 100 V, 70 V, and 50 V output tappings. They have short-to-ground and short-circuit detection functions, and can generate their own pilot tone for supervision purposes
-
BOSCH PVA 20CSE Call Station Extension
73,500৳Add to cartThe BOSCH PVA 20CSE is a Call Station Extension for the Paviro System. The Call Station Extension has 20 customization selection buttons.
- 20 free customizable functions keys, and two LEDs per button (green/red).
- The LED of BOSCH PVA 20CSE shall also be programmable for its own indication functionality.
- Fascia cover with transparent areas for customizable labels.
- RJ12 cable for data connection to call station or another keypad.
- Max. 5 keypads per call station.
- Sends & receives operational control to and from the call station
-
TOA A-2060 Mixer Power Amplifier
Read moreThe TOA A-2060 Mixer Power Amplifier is a high-cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches, and large rooms. (Check sound system for mosque price in Bangladesh)
TOA Power amplifier is well-suited for broadcasting paging and supplying background music in restaurants, pubs, shops, houses of worship, and so on. This TOA A-2060 Mixer Power Amplifier is simple to operate and benefits from separate bass and treble controls.
Call for Price
Reviews
There are no reviews yet.