ITC T-7800A IP Network PA & Intercom System Software
SKU:407,000৳
1) Using CPU Core i7, which could support up to 1,000 terminals;
2) Using dual-channel memory 8G DDR3;
3) Using high speed 256G SSD
4) With dual network interface to meet the demand of high speed data exchange;
5) Using 17-inch 16:9 HD screen of 1920x1080P, which is with LVDS digital interface;
6) With pull-style industrial level keyboard;
7) Using industrial level touch mouse;
8) Using 2 channel sound card, which could be expanded to 14 channel;
ITC T-7800A IP Network PA & Intercom System Software Specs:
| Model | T-7800A |
| Screen Size | 17-Inch |
| Screen Color | TFT 16 Bit True Color |
| Operation Method | 1240×768 Liquid Crystal Resistive Touch Screen (5 Wire) |
| Working Temp. | 5℃ to +60℃ |
| Working Relative Humidity | ≧75% |
| Hard Drive | SSD |
| Network Card | 1000M |
| SNR of System Audio Signal | Line: 70dB；Mic：60dB |
| Distortion of System Audio Signal | 1KHz<0.5% |
| Standard Input Level of System Audio Signal | Line: 300mV；Mic：5mV |
| Standard Output Level of System Audio Signal | 0dBV |
| Power Consumption | AC 220V/50Hz/300W |
| Dimension (WxDxH) | 484x310x314mm |
| Weight | 11Kg |
| Brand |
|---|
Related products
-
BOSCH PRS 2P250 Presadio Power Amplifiers
280,000৳Add to cart- BOSCH PRS 2P250 presadio power amplifiers 1, 2, 4, or 8 audio outputs (selection from 100/70/50 V outputs)
- Audio processing and delay for each amplifier channel
- Amplifier supervision and spare amplifier switching
- Loudspeaker line and loudspeaker supervision (LBB 4428/00 only line supervision)
- Eight control inputs and 1, 2, 4, or 8 control outputs
-
ITC-t-6701 Rack Mount Network Audio Adapter Power Amplifier
35,500৳Add to cart- 19 rack mount IP/TCP network audio adapter in 2U height
- ITC-t-6701 amplifier built-in single-channel TCP/IP decoder
- Decode digital audio data to analog amplifier
- Heart of IP background music, zone paging & voice alarm system
- Built-in 3.4 inch LCD screen displays the IP address and status in English
- Supplied a remote control over music selection, IP address change and volume attenuation
- A serial IP address write in communication port
- Numeric keys on the front panel for convenient operation
- 4 channel line outputs to amplifiers
- 4 channel 100V speaker inputs loop and 4 channel 3 wired volume control inputs
- 1 external line input (with volume control) and microphone input
- Automatically power off when no input for 5 minutes and automatically power on when
- signal feed into
- Pre-set power management
-
BOSCH LBB1938 Power Amplifier
133,000৳Add to cartThe Bosch LBB 1938/20 is a powerful 480 W power amplifier in a 3U high 19”case for rack mounting or tabletop use.
LEDs on the front panel of the LBB1938/20 show the status of the amplifier: power, audio output level, and supervised functions.
This high performance unit fulfills a wide range of public address requirements at a surprisingly low cost.
There are two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not get any announcements made via the priority input.
Rack mounting brackets supplied.
- 480 watts
- Very high audio performance power amp
- Can be used to boost Plena Voice alarm systems with system monitoring
- XLR and jack input with XLR and Jack loop through outputs
- 100 volt line input. Ideal for remote location booster amps
- 100v, 70v and 8 ohm outputs
- 24v override relay output
- Temperature controlled fan
- AC and 24VDC operation
- LED VU Meter
- Dual inputs with priority switching
- Temperature controlled forced front to back
- Mains, battery back-up, and pilot tone supervision
- TÜV certified according to IEC 60849
-
BOSCH PRS-2P250 Presadio Controller
235,000৳Add to cartThe Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
Reviews
There are no reviews yet.