ITC T-7800A IP Network PA & Intercom System Software
SKU:407,000৳
1) Using CPU Core i7, which could support up to 1,000 terminals;
2) Using dual-channel memory 8G DDR3;
3) Using high speed 256G SSD
4) With dual network interface to meet the demand of high speed data exchange;
5) Using 17-inch 16:9 HD screen of 1920x1080P, which is with LVDS digital interface;
6) With pull-style industrial level keyboard;
7) Using industrial level touch mouse;
8) Using 2 channel sound card, which could be expanded to 14 channel;
ITC T-7800A IP Network PA & Intercom System Software Specs:
| Model | T-7800A |
| Screen Size | 17-Inch |
| Screen Color | TFT 16 Bit True Color |
| Operation Method | 1240×768 Liquid Crystal Resistive Touch Screen (5 Wire) |
| Working Temp. | 5℃ to +60℃ |
| Working Relative Humidity | ≧75% |
| Hard Drive | SSD |
| Network Card | 1000M |
| SNR of System Audio Signal | Line: 70dB；Mic：60dB |
| Distortion of System Audio Signal | 1KHz<0.5% |
| Standard Input Level of System Audio Signal | Line: 300mV；Mic：5mV |
| Standard Output Level of System Audio Signal | 0dBV |
| Power Consumption | AC 220V/50Hz/300W |
| Dimension (WxDxH) | 484x310x314mm |
| Weight | 11Kg |
| Brand |
|---|
Related products
-
BOSCH PRS 4P125 Presadio Controller
266,000৳Add to cartThere are four types of Power Amplifier units in the Praesideo product range. These differ in the number of amplifier channels per frame: one, two, four, or eight. The overall power rating is 500 watts for all of the amplifiers. The Power Amplifiers can be set to 100 V, 70 V, and 50 V output tappings. They have short-to-ground and short-circuit detection functions, and can generate their own pilot tone for supervision purposes.
Functions:
The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short circuits. Control outputs are freely programmable for faults and call-related actions. The 2 x 16-character display and the rotary control enable local status inquiries. The display shows the VU? meter reading, when the audio monitoring mode is active. Audio can be monitored by headphones.
The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC backup supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
- 1, 2, 4, or 8 audio outputs (selection from 100/70/50 V outputs)
- Audio processing and delay for each amplifier channel
- Amplifier supervision and spare amplifier switching
- Loudspeaker line and loudspeaker supervision (LBB 4428/00 only line supervision)
- Eight control inputs and 1, 2, 4, or 8 control outputs
-
ITC T-6760 Rack Mount Network Audio Adapter Power Amplifier
104,160৳Add to cart- IP network audio adapter built-in digital class-D 60W, 120W, 240W & 350W amplifier.
- Direct to receive internet audio source and transmit to 70V, 100V, and low impedance loudspeakers.
- Non-dedicated network system solution.
- Could be installed anywhere of the LAN network.
- Economy network audio solution for multiple speaker applications.
- With a 3.4 inch LCD screen humanized operation interface.
- Zone definition is done through software, each network audio adapter could be regarded as one zone, or several audio adapters could be taken as one zone, moreover, several zones could be defined as a group for synchronous operation.
- One Aux input and one local microphone input, both with volume control.
- Remote control over IP address change and write-in, volume control, and local program selection from the server.
- Voice evacuation system with higher priority and local input with secondary priority. Moreover, the local input and program source priority could be customized
-
ITC T-67350 Rack Mount Network Audio Adapter
65,000৳Add to cartIP network Amplifier with built-in 350W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
Reviews
There are no reviews yet.