BOSCH LBB 1990/00 Plena Voice Alarm Router
SKU:120,000৳
The Bosch LBB 1992/00 Plena Voice Alarm Router is an expansion unit that can add six zones and 12 input contacts to the Voice Alarm System. It can use the built-in amplifier on the LBB 1990/00 Voice Alarm Controller and provides inputs and outputs for one or two amplifiers in a multi-amplifier one or two-channel system. The LBB1992/00 provides dual-channel operation for calls and BGM simultaneously to a maximum of six different zones, using two Plena amplifiers.
Additionally, the single-channel operation is possible with only one Plena amplifier. Multiple routers can also share one amplifier, including the internal amplifier on the controller unit. It is possible to use any number of amplifiers from one up to the number of routers used.
- The controller supports A/B wiring.
- Expand the voice alarm system with six zones
- EN 54‑16 certified and EN 60849 compliant
- 12 additional input contacts
- Six volume override output contacts
- Supervision within the Plena Voice Alarm System
- Up to 9 routers can be used
- Same functionality as the system controller
- Uses System controllers built-in amp or additional Plena booster amps
BOSCH LBB 1990/00 Plena Voice Alarm Router Specs:
- Voltage: 230/115 VAC, ±10%, 50/60 Hz
- Inrush curren: t 1.5 A @ 230 VAC / 3 A @ 115 VACMax power consumption: 50 VA
- Idle / max load* current: 0.2 A / 0.3 A
- Voltage: 24 VDC, +15% / -15%
- Current max: 1.8 A
- Typical / max load* current: 0.51 A / 1.5 A
- Trigger Inputs: 12 x (6 EMG, 6 business)
- Connectors: MC1,5 / 14-ST-3,5
- Activation: Programmable
- Supervision: On EMG inputs, programmable
- Supervision method: Series / parallel resistor
- Connector: MSTB 2,5 /16-ST
- Amp 1: 100 V / 70 V / 0 V
- Amp 2: 100 V / 0 V
- Power handling capacity: 1000 W
- Loudspeaker outputs: 12 x (2 x 6 zones)
- Connectors: MSTB 2,5 /16-ST, floating
- 100 V output: 700 W rated per zone
- Volume override types: 3-wire, 4-wire (24 V), 4-wire failsafe
- Connector: MC 1,5/14-ST-3,5
- Rating: 250 V, 7A, voltage-free
- General-purpose relays (2x): NO / COM
- Maximum load means the maximum load on 24 VDC, and indicator tests.
- Dimensions (H x W x D): 88 x 430 x 260 mm / (19″ wide, 2U high)
- Weight Approx.: 3 kg
- Mounting: Standalone, 19” rack
- Color: Charcoal
| Brand |
|---|
Related products
-
ITC T-67240 Rack Mount Network Audio Adapter
98,000৳Add to cartIP network Amplifier with built-in 240W amplifiers
> Directly receives streaming audio via the Internet and transmits to 70V, 100V and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
-
BOSCH PLE2CS Plena Call Station
35,700৳Add to cartThe Bosch Plena PLE-2CS 2 zone paging microphone is a high-quality call station with a sturdy metal base designed for use with the PLE series of amplifiers such as the Bosch PLE-2MA120 and PLE-2MA240. In addition to tabletop use, the special design of the PLE2CS enables the unit to be neatly flush-mounted. 2 zone selection keys enable either or both zones to be selected for paging – indicated by LEDs.
- Modern two-zone call station for the PLE series
- Selectable gain
- Speech filter and limiter
- Output level control
- Loop-through option for up to 8 call stations
- LED indications for zone selection, busy, and power on
-
BOSCH PRS 4P125 Presadio Controller
266,000৳Add to cartThere are four types of Power Amplifier units in the Praesideo product range. These differ in the number of amplifier channels per frame: one, two, four, or eight. The overall power rating is 500 watts for all of the amplifiers. The Power Amplifiers can be set to 100 V, 70 V, and 50 V output tappings. They have short-to-ground and short-circuit detection functions, and can generate their own pilot tone for supervision purposes.
Functions:
The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short circuits. Control outputs are freely programmable for faults and call-related actions. The 2 x 16-character display and the rotary control enable local status inquiries. The display shows the VU? meter reading, when the audio monitoring mode is active. Audio can be monitored by headphones.
The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC backup supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
- 1, 2, 4, or 8 audio outputs (selection from 100/70/50 V outputs)
- Audio processing and delay for each amplifier channel
- Amplifier supervision and spare amplifier switching
- Loudspeaker line and loudspeaker supervision (LBB 4428/00 only line supervision)
- Eight control inputs and 1, 2, 4, or 8 control outputs
-
ITC T-6700R IP Network PA & Intercom System Controller
75,000৳Add to cart- Compatible with Windows 2000, Windows XP, and Windows 7 operation system
- Full-duplex communication system software
- Compatible of network audio system and intercom two systems
- Standard TCP/IP communication protocol for industrial applications
- Parameters set up center and administrator management center
- Built-in decoder to transfer analog signal through the sound card into digital
- Head of the network audio system
- Collect and deliver sound over the internet
- A built-in weekly timer to program over music or sound files to automatically broadcast to the designated zone at pre-set time
- Built-in system status display to surveillance each unit is working conditions
- Direct manual selected priority music broadcast or zone paging
- License code registration software
- Password protection to change configuration and log in
- Remote set up and easy maintenance
- Support more than 1,00 tasks transmitted simultaneously
- Nine priority levels for different users
- A customized-mapped connection diagram is available
- Easy to inter-work with third-party system like CCTV, door access system, and home automation system
Reviews
There are no reviews yet.