BOSCH LBB 1990/00 Plena Voice Alarm Router
SKU:120,000৳
The Bosch LBB 1992/00 Plena Voice Alarm Router is an expansion unit that can add six zones and 12 input contacts to the Voice Alarm System. It can use the built-in amplifier on the LBB 1990/00 Voice Alarm Controller and provides inputs and outputs for one or two amplifiers in a multi-amplifier one or two-channel system. The LBB1992/00 provides dual-channel operation for calls and BGM simultaneously to a maximum of six different zones, using two Plena amplifiers.
Additionally, the single-channel operation is possible with only one Plena amplifier. Multiple routers can also share one amplifier, including the internal amplifier on the controller unit. It is possible to use any number of amplifiers from one up to the number of routers used.
- The controller supports A/B wiring.
- Expand the voice alarm system with six zones
- EN 54‑16 certified and EN 60849 compliant
- 12 additional input contacts
- Six volume override output contacts
- Supervision within the Plena Voice Alarm System
- Up to 9 routers can be used
- Same functionality as the system controller
- Uses System controllers built-in amp or additional Plena booster amps
BOSCH LBB 1990/00 Plena Voice Alarm Router Specs:
- Voltage: 230/115 VAC, ±10%, 50/60 Hz
- Inrush curren: t 1.5 A @ 230 VAC / 3 A @ 115 VACMax power consumption: 50 VA
- Idle / max load* current: 0.2 A / 0.3 A
- Voltage: 24 VDC, +15% / -15%
- Current max: 1.8 A
- Typical / max load* current: 0.51 A / 1.5 A
- Trigger Inputs: 12 x (6 EMG, 6 business)
- Connectors: MC1,5 / 14-ST-3,5
- Activation: Programmable
- Supervision: On EMG inputs, programmable
- Supervision method: Series / parallel resistor
- Connector: MSTB 2,5 /16-ST
- Amp 1: 100 V / 70 V / 0 V
- Amp 2: 100 V / 0 V
- Power handling capacity: 1000 W
- Loudspeaker outputs: 12 x (2 x 6 zones)
- Connectors: MSTB 2,5 /16-ST, floating
- 100 V output: 700 W rated per zone
- Volume override types: 3-wire, 4-wire (24 V), 4-wire failsafe
- Connector: MC 1,5/14-ST-3,5
- Rating: 250 V, 7A, voltage-free
- General-purpose relays (2x): NO / COM
- Maximum load means the maximum load on 24 VDC, and indicator tests.
- Dimensions (H x W x D): 88 x 430 x 260 mm / (19″ wide, 2U high)
- Weight Approx.: 3 kg
- Mounting: Standalone, 19” rack
- Color: Charcoal
| Brand |
|---|
Related products
-
ITC T-7800A IP Network PA & Intercom System Software
407,000৳Add to cart1) Using CPU Core i7, which could support up to 1,000 terminals;
2) Using dual-channel memory 8G DDR3;
3) Using high speed 256G SSD
4) With dual network interface to meet the demand of high speed data exchange;
5) Using 17-inch 16:9 HD screen of 1920x1080P, which is with LVDS digital interface;
6) With pull-style industrial level keyboard;
7) Using industrial level touch mouse;
8) Using 2 channel sound card, which could be expanded to 14 channel;
-
BOSCH PRS-2P250 Presadio Controller
235,000৳Add to cartThe Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
-
BOSCH PLN‑6TMW Plena Weekly Timer
126,600৳Add to cartThe Plena Weekly Timer is an accurate timer for use in public address systems. It is ideally suited for schools, shopping malls, and all other venues that need regularly timed messages, signals, or other controls. It is ideally suited for connection to the Plena Message Manager and Voice Alarm System.
-
ITC T-77120 Rack Mount Network Audio Adapter
1৳Add to cart1) Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.
2) 3.4 inch industrial-grade LCD screen, super anti-jamming performance, avoid instability infrared operation, clearly show most lattice pattern, and the machine working status.
3) Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time less than 1 second.
4) Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP(IP multi-Cast protocol), could transmit 16 bits stereo CD audio sign.
5) Built-in Hi-Fi analog amplifier,60W/120W/240W/350W/500W, 4-16Ω output and and constant voltage 70V-100V output.
6) One AUX and one MIC input, with independent volume control, treble and bass control, support paging without network
Reviews
There are no reviews yet.