Name: BOSCH PVA 2P500 PAVIRO Power Amplifier Price in Bangladesh
Price: 307500 BDT
Availability: InStock

BOSCH PVA 2P500 PAVIRO Power Amplifier

307,500৳

অস্থিতিশীল বাজার মূল্যের কারনে প্রোডাক্টের দাম ও স্টক পরিবর্তিত হতে পারে, তাই অর্ডার দেয়ার আগে আমাদের সাথে যোগাযোগ করার অনুরোধ রইলো।

The BOSCH PVA 2P500 PAVIRO power amplifier is a 2 x 500 Watt professional audio Class D-amplifier for evacuation purposes. It can be operated from both the mains and a DC supply.

Floating 100 V or 70 V power outputs
High efficient amplifier blocks in class-D technology
Outputs idling and short circuit-protected
Mains operation 120–240 V (50/60 Hz) and/or 24 V DC emergency backup
Electronically balanced inputs
Temperature monitoring function
Pilot tone and ground fault monitoring function via PVA-4CR12 controller or PVA-4R24 router
Processor control of all functions
Monitoring of the processor system via watchdog circuit
Non-volatile FLASH memory for configuration data
Internal monitoring function
Integrated audio relays
Line monitoring function

BOSCH PVA 2P500 PAVIRO Power Amplifier Sprecs:

The PVA 2P500 benefits from the lowest power consumption of any system in its class, minimizing running costs and requiring fewer backup batteries too. The system is extremely flexible and allows architecture changes at any time during installation and has a wide range of announcement/music combinations.

Ideal for small to medium-sized offices, regional airports, mid-sized hotels, factories, schools, and department stores. It can be operated from both the mains and a DC supply. The output voltage is galvanically insulated and is constantly monitored for a ground fault. An energy-saving mode and temperature-controlled fans reduce energy consumption and noise levels.

The control and monitoring functions are performed via CAN bus. This amplifier is designed for operation in an emergency evacuation system. The amplifiers are usually controlled via a controller and configured using IRISNet.

Rated load impedance (output power)
• 100 V	20 Ω (500 W)
• 70 V	10 Ω (500 W)
Rated output power, 1 kHz, THD ≤ 1%	2 ✕ 500 W1
Rated input voltage	+6 dBu
Max. RMS voltage swing, 1 kHz, THD ≤ 1%, without load
• 100 V	110 V
• 70 V	78 V
Voltage gain, ref. 1 kHz, fixed
• 70 V	33.2 dB
• 100 V	36.2 dB
Maximum load capacitance	2 μF
Input level, max.	+18 dBu (9.75 Vrms)
Frequency response, ref. 1 kHz, rated load, -3 dB	50 Hz to 25 kHz
Input impedance, active balanced	20 kΩ
Signal-to-noise ratio (A-weighted)	> 104 dB
Output noise (A-weighted)	< -62 dBu
Crosstalk , ref. 1 kHz	< -85 dB
Output stage topology	Class-D, transformer, floating
Power requirements
• AC	115–240 V (-10/+10%)2
• DC	21‑32 V
Power consumption, AC and DC	See section “Power consumption” in the operation manual
Inrush current	2A
Inrush current, after a five-second power cycle	1.3A
Mains fuse	T6.3A (internally)
DC fuse	30A (internally)
Ground fault	R < 50 kΩ
CAN-BUS port	2 ✕ RJ-45, 10 to 500 kbit/s
Protection	Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains Undervoltage protection, DC supply Undervoltage protection, inrush current limiter, ground fault
Cooling	Front-to-rear, temperature-controlled fans
Operating temperature	-5 °C to +45 °C
Safety class	Class I
Electromagnetic environment	E1, E2, E3
Product dimensions (Width ✕ Height ✕ Depth)	19”, 2 HU, 483 ✕ 88.2 ✕ 391mm
Net Weight	16.5kg