BOSCH Plena PLE1CS Call Station
SKU:20,000৳
The Plena PLE-1CS tabletop unidirectional condenser paging microphone is a high-quality call station with a sturdy metal base designed for use with the BOSCH PLE series of amplifiers. In addition to tabletop use, the special design enables the unit to be neatly flush-mounted.
The PLE1CS microphone features a large press to talk call button for ease of use and the flexible gooseneck enables the microphone to be positioned as required. A green LED confidence light illuminates to let you know the mic is in use.
- PTT-key for calls for activation
- Momentary or toggle
- Green LED, indicating microphone active
- Stable metal base design with fixed 2 m cable and lockable Euro-style connector
- Phantom powered by the amplifier
BOSCH Plena PLE1CS Call Station Specs:
Phantom power supply
Voltage range 12 to 48 V
Current consumption <8 mA
Performance:
Sensitivity 0.7 mV @ 85 dB SPL (2 mV/Pa)
Maximum input sound level 110 dB SPL
Distortion <0.6% (maximum input)
Input noise level (Equiv.) 28 dB SPLA (S/N 66 dBA ref. 1 Pa)
Frequency response 100 Hz to 16 kHz
Output impedance 200 ohm
Mechanical:
Base dimensions (H x W x D) 40 x 100 x 235 mm
(1.57 x 3.97 x 9.25 in)
Weight Approx. 1 kg (2.2 lb)
Color Charcoal with silver
Stem length with mic. 390 mm (15.35 in)
Cable length 2 m (6.56 ft)
Environmental:
Operating temperature -10 ºC to +45 ºC (14 ºF to +113 ºF)
Storage temperature -40 ºC to +70 ºC (-40 ºF to
+158 ºF)
Relative humidity <95%
| Brand |
|---|
Related products
-
BOSCH LBB1938 Power Amplifier
133,000৳Add to cartThe Bosch LBB 1938/20 is a powerful 480 W power amplifier in a 3U high 19”case for rack mounting or tabletop use.
LEDs on the front panel of the LBB1938/20 show the status of the amplifier: power, audio output level, and supervised functions.
This high performance unit fulfills a wide range of public address requirements at a surprisingly low cost.
There are two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not get any announcements made via the priority input.
Rack mounting brackets supplied.
- 480 watts
- Very high audio performance power amp
- Can be used to boost Plena Voice alarm systems with system monitoring
- XLR and jack input with XLR and Jack loop through outputs
- 100 volt line input. Ideal for remote location booster amps
- 100v, 70v and 8 ohm outputs
- 24v override relay output
- Temperature controlled fan
- AC and 24VDC operation
- LED VU Meter
- Dual inputs with priority switching
- Temperature controlled forced front to back
- Mains, battery back-up, and pilot tone supervision
- TÜV certified according to IEC 60849
-
BOSCH PLN‑6TMW Plena Weekly Timer
126,600৳Add to cartThe Plena Weekly Timer is an accurate timer for use in public address systems. It is ideally suited for schools, shopping malls, and all other venues that need regularly timed messages, signals, or other controls. It is ideally suited for connection to the Plena Message Manager and Voice Alarm System.
-
Call Station Numeric Keypad
50,500৳Add to cartThe Call-Station Numeric Keypad is used in combination with a basic or remote call-station. The call-station provides the microphone and press-to-talk key, while the numeric keypad can be used for user access, zone and zone group selection. It works together with call-station keypads for pre-configured actions. The built-in LCD provides feedback to the user.
Reviews
There are no reviews yet.