Category
- Access Control
- Access Control Package
- Accessories
- Adapters and Connectors
- Agro
- Astronomical Equipment
- Audio Accessories
- Bangla Quran Speaker
- Barcode Scanner
- Battery and Accessories
- Best Speaker
- Blackmagic Design
- Call Station
- Camera
- Capture Devices
- Car Checking System
- CCTV & Accessories
- Classroom Sound System
- Conference System
- Dash Camera
- Document Camera
- Elevator Controller
- Forklift
- GNSS Receiver and Accessories
- Guard Patrol System
- Lighting System
- Medical Equipment
- Megaphone
- Memory & HDD
- Metal Detector
- Microphone
- Microphone Foam Cover
- Microscope/Binocular
- Mosque Sound Solution Package
- Networking Products
- OLT Products
- PA
- PA Amplifier
- PA System
- PABX System
- Paperless Conference System
- Passport Scanner
- Podium System
- Portable Amplifier
- POS Terminal Device
- Power Supply
- Printer
- Projector
- PTZ Camera
- Repeater
- RFID Accessories
- Router
- Safety Products
- Security Products
- Smart Board Bangladesh
- Smart Door Lock
- Spill Kit
- Studio & ENG Camera
- Tools & Equipment
- Traffic Equipment
- Turnstile Gate
- VHF & UHF Antennas
- Video Conference
- Video Intercom System
- Walk Through Metal Detector
- Walkie Talkie
- Walkie-Talkie Battery & Accessories
- Wireless Conference System
- Wireless Guide System
- Wireless Products
- X-Ray Baggage Scanner
- Zoom Software
BOSCH Plena PLE1CS Call Station
SKU:20,000৳
The Plena PLE-1CS tabletop unidirectional condenser paging microphone is a high-quality call station with a sturdy metal base designed for use with the BOSCH PLE series of amplifiers. In addition to tabletop use, the special design enables the unit to be neatly flush-mounted.
The PLE1CS microphone features a large press to talk call button for ease of use and the flexible gooseneck enables the microphone to be positioned as required. A green LED confidence light illuminates to let you know the mic is in use.
- PTT-key for calls for activation
- Momentary or toggle
- Green LED, indicating microphone active
- Stable metal base design with fixed 2 m cable and lockable Euro-style connector
- Phantom powered by the amplifier
BOSCH Plena PLE1CS Call Station Specs:
Phantom power supply
Voltage range 12 to 48 V
Current consumption <8 mA
Performance:
Sensitivity 0.7 mV @ 85 dB SPL (2 mV/Pa)
Maximum input sound level 110 dB SPL
Distortion <0.6% (maximum input)
Input noise level (Equiv.) 28 dB SPLA (S/N 66 dBA ref. 1 Pa)
Frequency response 100 Hz to 16 kHz
Output impedance 200 ohm
Mechanical:
Base dimensions (H x W x D) 40 x 100 x 235 mm
(1.57 x 3.97 x 9.25 in)
Weight Approx. 1 kg (2.2 lb)
Color Charcoal with silver
Stem length with mic. 390 mm (15.35 in)
Cable length 2 m (6.56 ft)
Environmental:
Operating temperature -10 ºC to +45 ºC (14 ºF to +113 ºF)
Storage temperature -40 ºC to +70 ºC (-40 ºF to
+158 ºF)
Relative humidity <95%
Brand |
---|
Related products
-
BOSCH LBB 1957/00 Call Station
46,400৳Add to cartThe Bosch LBB 1957/00 keypad is an extension to the LBB 1956/00 Plena Voice Alarm Call Station that adds seven additional zone-select keys. The LBB1957/00 has the same stable metal base as the call station. In addition to tabletop use, the special design allows it to be neatly flush-mounted on desktops.
- Seven zone selection keys (6 programmable keys and all call)
- LED indications for zone selection
- Up to eight keypads can be connected together
- EN 60849 compliant
- Emergency, call, power, and fault indicators
- Use in conjunction with the LBB1956/00 call station
-
BOSCH LBB 1990/00 Plena Voice Alarm Controller
228,000৳Add to cartThe Plena LBB 1990/00 Voice Alarm Controller unit, is the heart of the voice alarm system. It is the basis of the Plena Voice Alarm System and has all the essential functionality for compliance with the EN54‑16 and EN60849 standards, including full system supervision, loudspeaker line impedance supervision, a supervised emergency microphone on the front panel, and a supervised message manager.
The LBB1990/00 enables messages to be merged to allow even more flexible use of pre-recorded announcements and evacuation messages. The controller can be used as a stand-alone system with up to six zones or expanded to up to 120 zones using additional six-zone routers.
Up to eight call stations can be connected. Interconnections are made using standard RJ45 connectors and shielded CAT-5 cable.
A built-in 240 W amplifier provides the power for the emergency call channel and BGM. Additional Plena Amplifiers can be added to provide two-channel operation. All amplifiers are supervised. The audio output uses standard analog audio 100 V line switching for full compatibility with the Plena family of public address equipment and Bosch EVAC-compliant loudspeakers. The system is configured using DIP switches for basic functionality and a PC for more advanced functions.
- Basic 6 zone system
- Expandable to 60 zones
- Up to 8 call stations can be connected
- Built-in 240 watt booster amp
- Digital message system
- Up to 255 pre-recorded messages and chimes/tones can be stored
- The emergency mic on the front panel
- 16 priority levels
- Individual BGM control for each zone
- Standard and emergency control in and outputs
- Additional Booster amps are supervised
- Can be set up using PC or via DIP switches
- Fully complies with IEC60849 and all national equivalents
-
BOSCH PVA 20CSE Call Station Extension
73,500৳Add to cartThe BOSCH PVA 20CSE is a Call Station Extension for the Paviro System. The Call Station Extension has 20 customization selection buttons.
- 20 free customizable functions keys, and two LEDs per button (green/red).
- The LED of BOSCH PVA 20CSE shall also be programmable for its own indication functionality.
- Fascia cover with transparent areas for customizable labels.
- RJ12 cable for data connection to call station or another keypad.
- Max. 5 keypads per call station.
- Sends & receives operational control to and from the call station
Reviews
There are no reviews yet.