BOSCH PRS-2P250 Presadio Controller
SKU:235,000৳
The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
BOSCH PRS-2P250 Presadio Controller Specs:
- Connector: 9-pole header for removable screw connector
- Connectors: Removable screw terminals
- Connectors: Removable screw terminals
- Storage Temperature : -20 to +70 ºC (-4 ºF to +158 ºF)
- Control Inputs : 8 x
- Relative Humidity: 15 to 90 %
- Control Outputs: 1 x per amplifier channel
- Operation: Closing contact (with supervision)
- Main Power Consumption: 354/43/16 W
- Product Weight: 29.98 lbs
- Rated load resistance: 40 ohms (100 V); 20 ohms (70 V) 10 ohm (50 V)
- Rated load Capacitance : 125 nF (100 V); 250 nF (70 V) 500 nF (50 V)
- Rated output power (per channel): 250 W (1 min. at 55 °C)
125 W (30 min. at 55 °C, cont. at 30 °C)
60 W (cont. at 55 °C) - Color: Charcoal with silver
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 23 F
- Mounting Standalone: 19-inch rack
- Air pressure 600 to 1100: hPa
- Battery Power consumption: 327/30/5 W
- Amplifier Type – Power Amplifier
| Brand |
|---|
Related products
-
BOSCH LBB 4430/00 Call Station Basic
49,500৳Add to cartProduct Code: OTC2471
The call station basic can make manual or prerecorded announcements to any pre-assigned zones. The call station basic has a microphone on a flexible stem, a push-to-talk button, a speaker, and a headset socket. The LBB 4430/00 can be extended with up to 16 keypads (LBB 4432/00 or LBB 4434/00), each with eight programmable keys. Extension with a numeric keypad (PRS-CSNKP) is also possible. The call station has a cardioid, supervised microphone on a gooseneck stem with good speech intelligibility.
-
Bosch PRS-CSI Call Station Interface
70,000৳Add to cartProduct Code: OTC2472
The PRS-CSI is an interface between a single remote call station, PRS-CSR, or a remote call station kit, PRS-CSRK, and the fiber optical Praesideo network. It uses CAT-5 cable for the connection to the remote call station. The CAT-5 cable, carrying digital audio and control data, can be as long as 1 km.
The length of the CAT-5 cable is not a part of the Praesideo optical network length. This considerably increases the overall possible length of the optical network, especially in cases, where the call station is located far from the rest of the system.
The call station interface can get its power from the Praesideo network, and/or from a local power supply. It is fully supervised. -
BOSCH LBC 3095/15 Pendant Sphere Speaker
10,400৳Add to cartProduct Code: OTC2194
The Bosch LBC 3095/15 is a pendant ball loudspeaker designed to be suspended from the ceiling via its connecting cable. Fitted with a 5.25″ driver, the LBC3095/15 is rated at 10 watts, 100-volt line. The LBC3095/15 is splash waterproof, rated IPx3, and suitable for outdoor use and in environments with high humidity levels such as swimming pools. Also ideal for use in buildings with high ceilings such as hypermarkets and superstores.
- Suitable for speech and music reproduction
- Simple power setting
- 5 m fixed connection cable
- Splash-waterproof
- Robust self-extinguishing ABS enclosure to UL 94 V0
- Complies with international installation and safety regulations
Reviews
There are no reviews yet.