BOSCH PRS-2P250 Presadio Controller
SKU:235,000৳
The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
BOSCH PRS-2P250 Presadio Controller Specs:
- Connector: 9-pole header for removable screw connector
- Connectors: Removable screw terminals
- Connectors: Removable screw terminals
- Storage Temperature : -20 to +70 ºC (-4 ºF to +158 ºF)
- Control Inputs : 8 x
- Relative Humidity: 15 to 90 %
- Control Outputs: 1 x per amplifier channel
- Operation: Closing contact (with supervision)
- Main Power Consumption: 354/43/16 W
- Product Weight: 29.98 lbs
- Rated load resistance: 40 ohms (100 V); 20 ohms (70 V) 10 ohm (50 V)
- Rated load Capacitance : 125 nF (100 V); 250 nF (70 V) 500 nF (50 V)
- Rated output power (per channel): 250 W (1 min. at 55 °C)
125 W (30 min. at 55 °C, cont. at 30 °C)
60 W (cont. at 55 °C) - Color: Charcoal with silver
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 23 F
- Mounting Standalone: 19-inch rack
- Air pressure 600 to 1100: hPa
- Battery Power consumption: 327/30/5 W
- Amplifier Type – Power Amplifier
| Brand |
|---|
Related products
-
BOSCH LBB 4430/00 Call Station Basic
49,500৳Add to cartProduct Code: OTC2471
The call station basic can make manual or prerecorded announcements to any pre-assigned zones. The call station basic has a microphone on a flexible stem, a push-to-talk button, a speaker, and a headset socket. The LBB 4430/00 can be extended with up to 16 keypads (LBB 4432/00 or LBB 4434/00), each with eight programmable keys. Extension with a numeric keypad (PRS-CSNKP) is also possible. The call station has a cardioid, supervised microphone on a gooseneck stem with good speech intelligibility.
-
Bosch Dicentis DCNM-WD
Read moreThe Wireless Device (DCNM‑WD) of the DICENTIS Wireless Conference System enables participants to speak, register a request-to-speak, and listen to a speaker during a meeting. The device can be easily configured as a single-use, dual-use or chairperson Wireless Device via the web
browser interface of the Wireless Access Point (DCNM‑WAP).- Removable Battery Pack, easy to change and charge
- Configurable as a participant, dual-use or chairperson Wireless Device by use of web browser interface
- Functionality can be expanded with software modules without the need for hardware modification
Call for Price
-
BOSCH PLE1MA030 Mixer Amplifier
43,500৳Add to cartThe BOSCH PLE1MA030 mixer amplifier is a 30-watt public address amplifier suitable for 100-volt line commercial audio systems as well as low impedance sound systems using 8-ohm loudspeakers. From the Plena range of mixer amplifiers, the Bosch PLE1MA030 is built to a high quality and features excellent sound and speech intelligibility thanks to a smart equalizing approach and built-in limiters.
Easy to use, with simple zone labels included in the box as well as setting indicators which enable the installer to place colored markers on the volume and tone controls to indicate optimum and maximum recommended volume settings.
Despite its simplicity, the PLE 1MA030 still has flexible features such as ducking, priority paging, and voice-activated emergency override. 19″ rack mounting brackets are included should you wish to build into a 19″ equipment rack.
- 30 watt, 100-volt line
- Also compatible with 8-ohm speakers
- 4 low noise balanced inputs for mic or line with phantom power
- 3 separate line inputs
- Further 100-volt input and Telephone input with priority
- RJ45 connection for remote wall plate WP3S2Z (see ancillary section)
- Contact closure and Vox priority
- Built-in chime for announcements
- Zone labeling and setting indicator pins
- Smart equalizing
- AC and 24VDC operation
- LED VU Meter
- BOSCH PLE1MA030 included 19″ rack mount brackets
Reviews
There are no reviews yet.