ITC T-6707 IP Network Active Speaker
SKU:1৳
- With local program insert module to have an instantaneous broadcast function.
- Remote priority automatic input
- ITC T-6707 support stereo input with volume control
- Built-in stereo power amplifier
- Built-in 8ohms, 10W hi-fi speaker
- With volume and balance control
- Support talk-back features
Call for Price
ITC T-6707 IP Network Active Speaker Specs:
| Network input | Standard RJ45×1, 1 input |
| Protocol support | TCP/IP, UDP, IGMP (group broadcasting) |
| Audio format | Mp3/Mp2 |
| Sampling rate | 8k-48kHz |
| Transmit speed | 10mbps |
| Audio format | 16 digit stereo CD tone |
| Frequncy output | 20-16kHz |
| T.H.D. | less than 0.3% |
| S.N. | more than 70dB |
| Output impedance | 8Ω |
| Output RMS | 10W |
| Aux line voltage input | 2*400mV industrial standard screw terminal |
| Working temp | -20 to +60 degrees |
| Working humidity | 10%-90% |
| Power consumption | less than 25W |
| Power supply | AC 120 or 230V, 50-60Hz |
| Weight | 3.66kg |
| Brand |
|---|
Related products
-
ITC T-67350 Rack Mount Network Audio Adapter
65,000৳Add to cartIP network Amplifier with built-in 350W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
-
ITC T-1S01 Mixer Pre-Amplifier
29,600৳Add to cartProduct Code: OTC2398
- 5-channel MIC input and 3-channel Aux input.
- With 1-channel EMC input.
- Independent volume control, MASTER volume control.
- ITC T-1S01 comes with a compulsive insert and Priority function.
- MIC balance input interface with phantom power.
- Individual Gain controls for MIC
- EMC has priority over all inputs except MIC 2
- Bass and Treble Tone Controls
- AC 110V or 230V and DC 24V operation
-
ITC T-67120 Rack Mount Network Audio Adapter
86,000৳Add to cart- Standard rack mount design and it’s in brushed aluminum case.
- It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
- It’s built in DSP so that it could process information quickly and start up less than 1s.
- It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP, IGMP, which achieve transmitting stereo audio in 16 bit in the network.
- It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
- With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
- With 1 EMC input with highest priority.
- With 1 AUX output to connect external power amplifier.
- With 1 3-wire forced switching output for volume control.
- Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa. And users could write program to control the power.
- With function to preset the mute depth and the background music.
- Support remotely unicast.
- Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
- Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
- With authorization operation management system.
- Support PSTN phone broadcast and SM voice broadcast.
- Support on demand unicast via Wifi and IR remote controller.
- Support spare line design for power supply at DC 24V
- With indicator to display status, level, protection, standby, etc.
- Support PC to modify its IP address via its serial port.
- This IP PA system adopt common network design so that the installation is convenient.
- Standby power is less than 3W.
-
ITC T-801N IP Digital Network Active Column Speaker
1৳Add to cart1. Professional integrated design, high-strength waterproof design, in line with IP54 protection and other certifications.
2. The device is designed with embedded computer technology and DSP audio processing technology. It adopts high-speed industrial grade chip and the startup time is less than 1s.
3. Built-in 1 channel network hardware audio decoding module, support TCP/IP, UDP, IGMP (multicast) protocol, realize networked transmission of the 16-bit stereo CD sound quality audio signal.
4. Built-in digital power amplifier module, the sound quality is fine and the power is strong.
5. Support 1000 levels of custom audio priority silent control.
6. Support server unified authorization operation management function, unified configuration management user and password.
7. Support DHCP, compatible with any network structure such as a router, switch, bridge gateway, Modem, Internet, 2G, 3G, 4G, multicast, unicast.
8. An IP address reset button restores the factory IP address when the IP address is lost.
9. The 1-way PC downloads the IP address serial port to modify the IP address of the network decoding module (internal).
10. Digital products, easy to expand, no geographical restrictions, no need to increase the equipment room management equipment, the use of the common network free line construction designs concept, easy to install.
Call for Price
Reviews
There are no reviews yet.