ITC T-67240 Rack Mount Network Audio Adapter
SKU:98,000৳
IP network Amplifier with built-in 240W amplifiers
> Directly receives streaming audio via the Internet and transmits to 70V, 100V and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
ITC T-67240 Rack Mount Network Audio Adapter Specs:
| Power Output | 240W | |
| Speaker Output | 70V, 100V & 4-16ohms | |
| Network Input | Standard RJ45 | |
| Protocol Support | TCP/IP, UDP, IGMP | |
| Audio Formats | MP3/MP2 | |
| Sampling Rate | 8K~48KHz | |
| Bit Rate | 8K~512Kbps | |
| Transmit Speed | 10Mbps | |
| Audio Format | 16 digit stereo CD level | |
| Frequency Response | 60-18KHz(+1dB, -3dB) | |
| THD | THD ≤ 0.1% | |
| S/N Ratio | ≥65dB | |
| Aux Input | 350mV | |
| Mic Input | 10mV | |
| EMC input | 775mV | |
| Power Consumption | 90W | |
| Standby Power Consumption | <3W | |
| Protection | High temp, overload and short-circuit | |
| Working temp | 5 ℃~40℃ | |
| Humidity | 20%~80% | |
| Power Supply | ~110V/60Hz or ~230V/50Hz | |
| Dimensions | 484x303x88mm | |
| Weight |
|
| Brand |
|---|
Related products
-
ITC T-67120 Rack Mount Network Audio Adapter
86,000৳Add to cart- Standard rack mount design and it’s in brushed aluminum case.
- It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
- It’s built in DSP so that it could process information quickly and start up less than 1s.
- It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP, IGMP, which achieve transmitting stereo audio in 16 bit in the network.
- It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
- With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
- With 1 EMC input with highest priority.
- With 1 AUX output to connect external power amplifier.
- With 1 3-wire forced switching output for volume control.
- Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa. And users could write program to control the power.
- With function to preset the mute depth and the background music.
- Support remotely unicast.
- Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
- Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
- With authorization operation management system.
- Support PSTN phone broadcast and SM voice broadcast.
- Support on demand unicast via Wifi and IR remote controller.
- Support spare line design for power supply at DC 24V
- With indicator to display status, level, protection, standby, etc.
- Support PC to modify its IP address via its serial port.
- This IP PA system adopt common network design so that the installation is convenient.
- Standby power is less than 3W.
-
ITC-t-6701 Rack Mount Network Audio Adapter Power Amplifier
35,500৳Add to cart- 19 rack mount IP/TCP network audio adapter in 2U height
- ITC-t-6701 amplifier built-in single-channel TCP/IP decoder
- Decode digital audio data to analog amplifier
- Heart of IP background music, zone paging & voice alarm system
- Built-in 3.4 inch LCD screen displays the IP address and status in English
- Supplied a remote control over music selection, IP address change and volume attenuation
- A serial IP address write in communication port
- Numeric keys on the front panel for convenient operation
- 4 channel line outputs to amplifiers
- 4 channel 100V speaker inputs loop and 4 channel 3 wired volume control inputs
- 1 external line input (with volume control) and microphone input
- Automatically power off when no input for 5 minutes and automatically power on when
- signal feed into
- Pre-set power management
-
ITC T-6216 16 Channel Power Sequencer
34,500৳Add to cart1) In standard 2U Cabinet; the black panel is in the material of alumina; user-friendly design; sophisticated technique;
2) ITC T-6216 includes 16-channels power output whose voltage and current is AC 230V/10A;
3) With an electronic lock switcher, the user could turn on/off the 16 channel power output manually; the device could work with a timer or intelligent controller to realize automation;
4) The interval time of power output, in turn. -
ITC T-67500 Rack Mount Network Audio Adapter
68,000৳Add to cartIP network Amplifier with built-in 500W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
Reviews
There are no reviews yet.