ITC T-77500 Rack Mount Network Audio Adapter
SKU:1৳
1) Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.
2) 3.4 inch industrial-grade LCD screen, super anti-jamming performance, avoid instability infrared operation, clearly show most lattice pattern, and the machine working status.
3) Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time to less than 1 second.
4) Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP(IP multi-Cast protocol), could transmit 16 bits stereo CD audio sign.
5) Built-in Hi-Fi analog amplifier,60W/120W/240W/350W/500W, 4-16Ω output and and constant voltage 70V-100V output.
6) One AUX and one MIC input, with independent volume control, treble and bass control, support paging without network.
7) One EMC input, fire emergency audio signal input with the highest priority
8) Two AUX outputs, connect with external amplifier, standard interfaces RCA port, Wiring connection is very convenient.
9) One three-wire volume with relay output, without forced cutting power supply, compatible with four-wire fire cutting, need to connect with 24V power supply.
ITC T-77500 Rack Mount Network Audio Adapter Specs:
|
Network Interface
|
RJ45
|
|
Transmission Speed
|
100Mbps
|
|
Communication Protocol
|
TCP/IP, UDP, IGMP(multicast)
|
|
Audio Format
|
MP3/MP2
|
|
Audio Mode
|
16 digit stereo CD sound level
|
|
Sampling Rate
|
8K~48KHz
|
|
Bit Rate
|
8K-512Kbps
|
|
EMC Input Sensitivity
|
775mV (Unbalance)
|
|
AUX Input Sensitivity
|
350mV (Unbalance)
|
|
MIC Input Sensitivity
|
5mV (Unbalance)
|
|
AUX output amplitude
|
1000mV 2 RCA output
|
|
AUX output impedance
|
470Ω
|
|
Treble
|
±10dB
|
|
Bass
|
±10dB
|
|
Power Output
|
500W
|
|
Power Consumption
|
750W
|
|
Standby Power Consumption
|
<3W
|
|
Frequency Response
|
80Hz-16KHz
|
|
T.H.D
|
THD≤1%
|
|
S/N
|
≥65dB
|
|
Speaker Output
|
70V, 100V & 4-16ohms
|
|
Protection
|
DC output, High temp, overload and short-circuit
|
|
Working Temp
|
5℃~40℃
|
|
Humidity
|
20%~80%, Relative humidity, without condensation
|
|
Power Supply
|
~220-240V 50/60Hz
|
|
Dimensions
|
484 x 359 x 132 mm
|
|
Weight
|
18Kg
|
| Brand |
|---|
Related products
-
ITC T-67350 Rack Mount Network Audio Adapter
65,000৳Add to cartIP network Amplifier with built-in 350W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
-
ITC T-6702 (A) Network Paging Microphone
51,000৳Add to cartProduct Code: OTC2367
The T-6702 is a full-duplex network audio paging microphones, built-in one-way and two-way communication system. This paging microphone could be installed anywhere on the LAN system. The T-6702 network paging microphone has several paging modes include zone paging, group paging, all zone paging, two-way intercom, conference system, discussion system & voting system.
The T-6702 is built-in an LCD to display program status and its IP address, the end-user is accessible to change the IP setting with a password. It is built-in a 1W speaker with excellent sound clearance so as to ensure the communication is smooth and clear. This microphone design is adopted advanced technology to avoid echo noise and to avoid data delay as well.
-
ITC T-67120 Rack Mount Network Audio Adapter
86,000৳Add to cart- Standard rack mount design and it’s in brushed aluminum case.
- It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
- It’s built in DSP so that it could process information quickly and start up less than 1s.
- It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP, IGMP, which achieve transmitting stereo audio in 16 bit in the network.
- It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
- With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
- With 1 EMC input with highest priority.
- With 1 AUX output to connect external power amplifier.
- With 1 3-wire forced switching output for volume control.
- Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa. And users could write program to control the power.
- With function to preset the mute depth and the background music.
- Support remotely unicast.
- Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
- Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
- With authorization operation management system.
- Support PSTN phone broadcast and SM voice broadcast.
- Support on demand unicast via Wifi and IR remote controller.
- Support spare line design for power supply at DC 24V
- With indicator to display status, level, protection, standby, etc.
- Support PC to modify its IP address via its serial port.
- This IP PA system adopt common network design so that the installation is convenient.
- Standby power is less than 3W.
-
ITC T-7723 IP Network Fire Alarm Interface
1৳Add to cart- Used in Fire service center to acquire firm alarm circuit.
- Standard rack mount design, 1U height, high-grade brushed aluminum panels, sophisticated
- technology, all show high-end temperament.
- The equipment adopts an embedded industrial-grade dual-core processing chip (ARM + DSP), start time is less than 1 second.
- 16 channel fire short circuit signal input, can be unlimited extension input interface, convenient for the larger system.
- Support a key to restore the factory function setting, maximum convenience to system
- maintenance and management.
- Panel support a key to cancel the task.
- Standard network interface, full-speed connections of up to 1000M.
- Specifications
Call for Price
Reviews
There are no reviews yet.