BOSCH Keypad Call Station
SKU:32,500৳
- Eight freely programmable selection keys
- Serial data and power interface to call station basic
- Up to 16 keypads can be connected to one call station basic
- Activation indicator for each key
- Stylish and modern design
BOSCH Keypad Call Station Specs:
- Eight freely programmable selection keys.
- Serial data and power interface to call station basic.
- Up to 16 keypads can be connected to one call station basic.
- Activation indicator for each key.
- Stylish and modern design.
| Power consumption | 1.5 W (DC) |
| Dimensions (H x W x D) | 70 x 95 x 200 mm (2.8 x 3.7 x 7.9 in) |
| Weight | 0.3 kg (0.7 lb) |
| Operating temperature | -5 Degree Celsius to +45 Degree Celsius (+23 Degree F to +113 degree F) |
| Storage temperature | -20 Degree Celsius to +70 Degree Celsius (-4 degree F to +158 degree F) |
| Brand |
|---|
Related products
-
Bosch PRS-1P500 Power Amplifier
195,000৳Add to cartThere are four types of Power Amplifier units in the Praesideo product range. These differ in the number of amplifier channels per frame: one, two, four, or eight. The overall power rating is 500 watts for all of the amplifiers. The Power Amplifiers can be set to 100 V, 70 V, and 50 V output tappings. They have short-to-ground and short-circuit detection functions, and can generate their own pilot tone for supervision purposes
-
Bosch PRS-CSR Call Station Remote
65,500৳Add to cartThe PRS-CSR is a call station with the same functionality as the basic call station, LBB 4430/00, but it uses CAT-5 cable for its connection to the Praesideo network. It connects, one-to-one, to the call station interface, PRS-CSI, which is part of the Praesideo optical network.
The CAT-5 cable, carrying digital audio and control data, can be as long as 1 km. The length of the CAT-5 cable is not a part of the Praesideo optical network length. This considerably increases the overall possible length of the optical network.
The PRS-CSR can be extended with up to 16 keypads (LBB 4432/00 or LBB 4434/00), each with eight programmable keys. Extension with a numeric keypad (PRS-CSNKP) is also possible.
-
BOSCH LBB 1957/00 Call Station
46,400৳Add to cartThe Bosch LBB 1957/00 keypad is an extension to the LBB 1956/00 Plena Voice Alarm Call Station that adds seven additional zone-select keys. The LBB1957/00 has the same stable metal base as the call station. In addition to tabletop use, the special design allows it to be neatly flush-mounted on desktops.
- Seven zone selection keys (6 programmable keys and all call)
- LED indications for zone selection
- Up to eight keypads can be connected together
- EN 60849 compliant
- Emergency, call, power, and fault indicators
- Use in conjunction with the LBB1956/00 call station
-
BOSCH LBB 4428 Presadio Controller
340,000৳Add to cartHere are four types of Power Amplifier units in the Praesideo product range. These differ in the number of amplifier channels per frame: one, two, four, or eight. The overall power rating is 500-watts for all of the amplifiers. The Power Amplifiers can be set to 100 V, 70 V, and 50 V output tappings. They have short-to-ground and short-circuit detection functions and can generate their own pilot tone for supervision purposes.
The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions and priorities can be assigned to these inputs.
Each control input has the ability to monitor the attached line for open and short circuits. Control outputs are freely programmable for faults and call-related actions. The 2 x 16-character display and the rotary control enable local status inquiries. The display shows the VU-meter reading when the audio monitoring mode is active.
Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC backup supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Reviews
There are no reviews yet.