BOSCH LBB 1990/00 Plena Voice Alarm Router
SKU:120,000৳
The Bosch LBB 1992/00 Plena Voice Alarm Router is an expansion unit that can add six zones and 12 input contacts to the Voice Alarm System. It can use the built-in amplifier on the LBB 1990/00 Voice Alarm Controller and provides inputs and outputs for one or two amplifiers in a multi-amplifier one or two-channel system. The LBB1992/00 provides dual-channel operation for calls and BGM simultaneously to a maximum of six different zones, using two Plena amplifiers.
Additionally, the single-channel operation is possible with only one Plena amplifier. Multiple routers can also share one amplifier, including the internal amplifier on the controller unit. It is possible to use any number of amplifiers from one up to the number of routers used.
- The controller supports A/B wiring.
- Expand the voice alarm system with six zones
- EN 54‑16 certified and EN 60849 compliant
- 12 additional input contacts
- Six volume override output contacts
- Supervision within the Plena Voice Alarm System
- Up to 9 routers can be used
- Same functionality as the system controller
- Uses System controllers built-in amp or additional Plena booster amps
BOSCH LBB 1990/00 Plena Voice Alarm Router Specs:
- Voltage: 230/115 VAC, ±10%, 50/60 Hz
- Inrush curren: t 1.5 A @ 230 VAC / 3 A @ 115 VACMax power consumption: 50 VA
- Idle / max load* current: 0.2 A / 0.3 A
- Voltage: 24 VDC, +15% / -15%
- Current max: 1.8 A
- Typical / max load* current: 0.51 A / 1.5 A
- Trigger Inputs: 12 x (6 EMG, 6 business)
- Connectors: MC1,5 / 14-ST-3,5
- Activation: Programmable
- Supervision: On EMG inputs, programmable
- Supervision method: Series / parallel resistor
- Connector: MSTB 2,5 /16-ST
- Amp 1: 100 V / 70 V / 0 V
- Amp 2: 100 V / 0 V
- Power handling capacity: 1000 W
- Loudspeaker outputs: 12 x (2 x 6 zones)
- Connectors: MSTB 2,5 /16-ST, floating
- 100 V output: 700 W rated per zone
- Volume override types: 3-wire, 4-wire (24 V), 4-wire failsafe
- Connector: MC 1,5/14-ST-3,5
- Rating: 250 V, 7A, voltage-free
- General-purpose relays (2x): NO / COM
- Maximum load means the maximum load on 24 VDC, and indicator tests.
- Dimensions (H x W x D): 88 x 430 x 260 mm / (19″ wide, 2U high)
- Weight Approx.: 3 kg
- Mounting: Standalone, 19” rack
- Color: Charcoal
| Brand |
|---|
Related products
-
ITC T-6700R IP Network PA & Intercom System Controller
75,000৳Add to cart- Compatible with Windows 2000, Windows XP, and Windows 7 operation system
- Full-duplex communication system software
- Compatible of network audio system and intercom two systems
- Standard TCP/IP communication protocol for industrial applications
- Parameters set up center and administrator management center
- Built-in decoder to transfer analog signal through the sound card into digital
- Head of the network audio system
- Collect and deliver sound over the internet
- A built-in weekly timer to program over music or sound files to automatically broadcast to the designated zone at pre-set time
- Built-in system status display to surveillance each unit is working conditions
- Direct manual selected priority music broadcast or zone paging
- License code registration software
- Password protection to change configuration and log in
- Remote set up and easy maintenance
- Support more than 1,00 tasks transmitted simultaneously
- Nine priority levels for different users
- A customized-mapped connection diagram is available
- Easy to inter-work with third-party system like CCTV, door access system, and home automation system
-
BOSCH PRS-2P250 Presadio Controller
235,000৳Add to cartThe Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
-
ITC T-6760 Rack Mount Network Audio Adapter Power Amplifier
104,160৳Add to cart- IP network audio adapter built-in digital class-D 60W, 120W, 240W & 350W amplifier.
- Direct to receive internet audio source and transmit to 70V, 100V, and low impedance loudspeakers.
- Non-dedicated network system solution.
- Could be installed anywhere of the LAN network.
- Economy network audio solution for multiple speaker applications.
- With a 3.4 inch LCD screen humanized operation interface.
- Zone definition is done through software, each network audio adapter could be regarded as one zone, or several audio adapters could be taken as one zone, moreover, several zones could be defined as a group for synchronous operation.
- One Aux input and one local microphone input, both with volume control.
- Remote control over IP address change and write-in, volume control, and local program selection from the server.
- Voice evacuation system with higher priority and local input with secondary priority. Moreover, the local input and program source priority could be customized
Reviews
There are no reviews yet.