BOSCH PAVIRO PVA 4CR12 Controller Price in Bangladesh

Cart

Your Cart is Empty

Back To Shop

BOSCH PAVIRO PVA 4CR12 Controller

362,000৳ 

The PVA-4CR12 controller is the central paging manager for the PAVIRO system. Eight local audio inputs can be switched to four audio outputs. A two channel message manager is integrated. The controller provides all the audio processing, supervision and control functions for a complete PAVIRO system.

  • Low power consumption in standby mode
  • Extreme flexibility
  • Excellent sound quality >106 dB s/n ratio
  • Up to 85 minutes internal digital message storage

BOSCH PAVIRO PVA 4CR12 Controller Specs:

The controller is equipped with 12 zones, 18 GPIs, and 19 GPOs. One controller can handle up to 2000W loudspeaker load. Additional zones and power can be added by using up to 20 external routers and 40 amplifiers with each 2x 500W. The zone indicator lights on the front indicate the current status of every zone: Green: Zone in use for the non-emergency purpose; Red: Zone in use for the emergency purpose; Yellow: Zone fault detected; Off Zone in idle condition.

Audio 8 audio inputs, 4 audio outputs
Safety/redundancy Internal supervision, system monitoring, watchdog, fault output
PC configuration and control software Configuration Wizard: Easy system configuration.
IRIS-Net: Integration of controller, amplifiers, call stations, routers and peripheral control;
configuration, control, and supervision for complete audio systems; programmable user control panels and access levels.
Hot Swapper (included in IRIS-Net package): Easy updating of messages during runtime.
Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB)
Signal-to-noise ratio (A-weighted) Line in to line out: 106 dB typical
THD+N < 0.05%
Crosstalk (line level) Line in to line out (0 dB gain): < 100 dB at 1 kHz
Sample rate 48 kHz
DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing
Audio inputs (microphone/line level) MIC/LINE: 2 ✕ 3-pin port, electronically symmetric AUX: 2 ✕ Stereo RCA
Input level (nominal) MIC/LINE: 15 dBu AUX: 9 dBu
Input level (max. before clip) MIC/LINE: 18 dBu AUX: 12 dBu
Input impedances MIC/LINE: 2.2 kΩ AUX: 8 kΩ
Common mode rejection MIC/LINE: > 50 dB
Phantom power, switchable MIC/LINE: 48 V DC
A/D conversion 24 Bit, Sigma-Delta, 128 times oversampling
Audio inputs (100 V) AMP IN: 2 ✕ 6-pin port
Max. voltage 120 V
Max. current 7.2 A
Max. power 500 W
Audio outputs (line level) LINE OUT: 1 x RJ-45, 4 x 3-pin port
Output level (nominal) 6 dBu
Output level (max. before clip) 9 dBu
Output impedance <50 Ω
Min. load impedance 400 Ω
D/A conversion 24 Bit, Sigma-Delta, 128 times oversampling
Audio outputs (100 V) SPEAKER OUT: 2 ✕ 12-pin port
Max. voltage 120 Veff
Max. current 7.2 A
Max. power 500 W

 

Crosstalk (100 V) AMP IN to SPEAKER OUT: < 100 dB at 1 kHz with 1 kΩ load
Call station bus (CST) 4 ✕ integrated power+CAN+audio interface, RJ-45
Power +24 V DC, electronic fuse
CAN 10, 20 or 62.5 kbit/s
Audio electronically symmetric
Max. length 1000 m
ANALOG CONTROL IN 1 ✕ 12-pin port
Control inputs 8 (analog 0-10 V/logic control; low: U ≤ 5 V DC; high: U ≥ 10 V DC; Umax = 32 V DC)
Reference outputs +10 V, 100 mA GND
Time sync input 1 (DCF-77 receiver)
CONTROL OUT HP 1 ✕ 12-pin port
Control outputs 6 High Power outputs (open collector, Umax = 32 V, Imax = 1 A)
Reference output V +24 V, Imax = 200 mA
Ready/fault output 1 (NO/NC relay contacts, Umax = 32 V, Imax= 1 A)
Slave clock output 1 (24 V DC, max. 1 A)
CONTROL IN 2 ✕ 10-pin port
Control inputs 5 supervised inputs (0–24 V, Umax = 32 V) 5 isolated inputs (low: U ≤ 5 V DC; high: U ≥ 10 V DC;, Umax = 32 V)
CONTROL OUT 2 ✕ 10-pin port
Control outputs 12 Low Power outputs (open collector, Umax = 32 V, Imax = 40 mA)
Control relay 1 (NO/NC relay contacts, Umax = 32 V, Imax= 1 A)
Interfaces
Ethernet 1 ✕ RJ-45, 10/100 MB (for PC connection)
CAN-BUS port 2 ✕ RJ-45, 10 to 500 kbit/s (for amplifier, router connection)
RS-232 2 ✕ 9-pin DSUB (port 1 for PROMATRIX 4000, port 2 for service only)
DC power input 21–32 V DC
Power consumption 10 to 250 W
Operating temperature -5 °C to +45 °C
Electromagnetic environment E1, E2, E3
Product dimensions (Width ✕ Height ✕ Depth) 19”, 2 HU, 483 ✕ 88.2 ✕ 375 mm
Net weight 8.0 kg
Shipping weight 9.5 kg
Audio 8 audio inputs, 4 audio outputs
Safety/redundancy Internal supervision, system monitoring, watchdog, fault output
PC configuration and control software Configuration Wizard: Easy system configuration.
IRIS-Net: Integration of controller, amplifiers, call stations, routers and peripheral control;
configuration, control, and supervision for complete audio systems; programmable user control panels and access levels.
Hot Swapper (included in IRIS-Net package): Easy updating of messages during runtime.
Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB)
Signal-to-noise ratio (A-weighted) Line into the line out 106 dB typical
THD+N < 0.05%
Crosstalk (line level) Line in to line out (0 dB gain): < 100 dB at 1 kHz
Sample rate 48 kHz
DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing
Audio inputs (microphone/line level) MIC/LINE: 2 ✕ 3-pin port, electronically symmetric AUX: 2 ✕ Stereo RCA
Input level (nominal) MIC/LINE: 15 dBu AUX: 9 dBu
Input level (max. before clip) MIC/LINE: 18 dBu AUX: 12 dBu
Input impedances MIC/LINE: 2.2 kΩ AUX: 8 kΩ
Common mode rejection MIC/LINE: > 50 dB
Phantom power, switchable MIC/LINE: 48 V DC
A/D conversion 24 Bit, Sigma-Delta, 128 times oversampling
Audio inputs (100 V) AMP IN: 2 ✕ 6-pin port
Max. voltage 120 V
Max. current 7.2 A
Max. power 500 W
Audio outputs (line level) LINE OUT: 1 x RJ-45, 4 x 3-pin port
Output level (nominal) 6 dBu
Output level (max. before clip) 9 dBu
Output impedance <50 Ω
Min. load impedance 400 Ω
D/A conversion 24 Bit, Sigma-Delta, 128 times oversampling
Audio outputs (100 V) SPEAKER OUT: 2 ✕ 12-pin port
Max. voltage 120 Veff
Max. current 7.2 A
Max. power 500 W
Crosstalk (100 V) AMP IN to SPEAKER OUT: < 100 dB at 1 kHz with 1 kΩ load
Call station bus (CST) 4 ✕ integrated power+CAN+audio interface, RJ-45
Power +24 V DC, electronic fuse
CAN 10, 20 or 62.5 kbit/s
Audio electronically symmetric
Max. length 1000 m
ANALOG CONTROL IN 1 ✕ 12-pin port
Control inputs 8 (analog 0-10 V/logic control; low: U ≤ 5 V DC; high: U ≥ 10 V DC; Umax = 32 V DC)
Reference outputs +10 V, 100 mA GND
Time sync input 1 (DCF-77 receiver)
CONTROL OUT HP 1 ✕ 12-pin port
Control outputs 6 High Power outputs (open collector, Umax = 32 V, Imax = 1 A)
Reference output V +24 V, Imax = 200 mA
Ready/fault output 1 (NO/NC relay contacts, Umax = 32 V, Imax= 1 A)
Slave clock output 1 (24 V DC, max. 1 A)
CONTROL IN 2 ✕ 10-pin port
Control inputs 5 supervised inputs (0–24 V, Umax = 32 V) 5 isolated inputs (low: U ≤ 5 V DC; high: U ≥ 10 V DC; Umax = 32 V)
CONTROL OUT 2 ✕ 10-pin port
Control outputs 12 Low Power outputs (open collector, Umax = 32 V, Imax = 40 mA)
Control relay 1 (NO/NC relay contacts, Umax = 32 V, Imax= 1 A)
Interfaces
Ethernet 1 ✕ RJ-45, 10/100 MB (for PC connection)
CAN BUS port 2 ✕ RJ-45, 10 to 500 kbit/s (for amplifier, router connection)
DC power input 21–32 V DC
Power consumption 10 to 250 W
Operating temperature -5 °C to +45 °C (+23 °F to +113 °F)
Storage and transport temperature -40 °C to +70 °C (-40 °F to +158 °F)
Electromagnetic environment E1, E2, E3
Product dimensions (Width ✕ Height ✕ Depth) 19”, 2 HU, 483 ✕ 88.2 ✕ 375 mm
Net Weight 8.0kg

Download Catalog

# Check Conference System

Brand

Reviews

There are no reviews yet.

Be the first to review “BOSCH PAVIRO PVA 4CR12 Controller”

Your email address will not be published. Required fields are marked *

Cart

Your Cart is Empty

Back To Shop