BOSCH PLE1CS Plena Call Station With 6 Zones
SKU:48,800৳
The BOSCH PLE1CS Plena call station paging microphone is a stylish design high-quality call station with a stable metal base, a flexible microphone stem, and a unidirectional condenser microphone. The LBB1956/00 can make calls to selected zones (one to six and all-call) in a public address system built with the Plena Voice Alarm System. In addition to tabletop use, the special design allows it to be neatly flush-mounted on desktops.
- Stylish six-zone call station for the Plena Voice Alarm System
- Uni-directional condenser mic on a flexible stem
- Six zone selection keys, all-call key, and momentary PTT-key for calls
- Selectable gain, speech filter, limiter, and output level for improved intelligibility
- LED indications for zone selection, fault, and emergency state
- Call station extension provides seven additional zone and zone group keys
- Allows connection of expansion keypad LBB1957
BOSCH PLE1CS Plena Call Station With 6 Zones Specs:
Controls and indicators
- Four status LEDs
- PTT-key
- PTT status LED
- Six zone selection keys
- Six zone selection LEDs
- All-call key
- Eight DIP switches
- Rotary volume control
Interconnections
- Two RJ45 jacks
- 24 VDC input
- Keypad connector
| Brand |
|---|
Related products
-
ITC T-67500 Rack Mount Network Audio Adapter
68,000৳Add to cartIP network Amplifier with built-in 500W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
-
ITC T-67120 Rack Mount Network Audio Adapter
86,000৳Add to cart- Standard rack mount design and it’s in brushed aluminum case.
- It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
- It’s built in DSP so that it could process information quickly and start up less than 1s.
- It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP, IGMP, which achieve transmitting stereo audio in 16 bit in the network.
- It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
- With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
- With 1 EMC input with highest priority.
- With 1 AUX output to connect external power amplifier.
- With 1 3-wire forced switching output for volume control.
- Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa. And users could write program to control the power.
- With function to preset the mute depth and the background music.
- Support remotely unicast.
- Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
- Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
- With authorization operation management system.
- Support PSTN phone broadcast and SM voice broadcast.
- Support on demand unicast via Wifi and IR remote controller.
- Support spare line design for power supply at DC 24V
- With indicator to display status, level, protection, standby, etc.
- Support PC to modify its IP address via its serial port.
- This IP PA system adopt common network design so that the installation is convenient.
- Standby power is less than 3W.
-
Call Station Numeric Keypad
50,500৳Add to cartThe Call-Station Numeric Keypad is used in combination with a basic or remote call-station. The call-station provides the microphone and press-to-talk key, while the numeric keypad can be used for user access, zone and zone group selection. It works together with call-station keypads for pre-configured actions. The built-in LCD provides feedback to the user.
Reviews
There are no reviews yet.