BOSCH PRS-2P250 Presadio Controller
SKU:235,000৳
The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
BOSCH PRS-2P250 Presadio Controller Specs:
- Connector: 9-pole header for removable screw connector
- Connectors: Removable screw terminals
- Connectors: Removable screw terminals
- Storage Temperature : -20 to +70 ºC (-4 ºF to +158 ºF)
- Control Inputs : 8 x
- Relative Humidity: 15 to 90 %
- Control Outputs: 1 x per amplifier channel
- Operation: Closing contact (with supervision)
- Main Power Consumption: 354/43/16 W
- Product Weight: 29.98 lbs
- Rated load resistance: 40 ohms (100 V); 20 ohms (70 V) 10 ohm (50 V)
- Rated load Capacitance : 125 nF (100 V); 250 nF (70 V) 500 nF (50 V)
- Rated output power (per channel): 250 W (1 min. at 55 °C)
125 W (30 min. at 55 °C, cont. at 30 °C)
60 W (cont. at 55 °C) - Color: Charcoal with silver
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 23 F
- Mounting Standalone: 19-inch rack
- Air pressure 600 to 1100: hPa
- Battery Power consumption: 327/30/5 W
- Amplifier Type – Power Amplifier
| Brand |
|---|
Related products
-
BOSCH LBB1938 Power Amplifier
133,000৳Add to cartThe Bosch LBB 1938/20 is a powerful 480 W power amplifier in a 3U high 19”case for rack mounting or tabletop use.
LEDs on the front panel of the LBB1938/20 show the status of the amplifier: power, audio output level, and supervised functions.
This high performance unit fulfills a wide range of public address requirements at a surprisingly low cost.
There are two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not get any announcements made via the priority input.
Rack mounting brackets supplied.
- 480 watts
- Very high audio performance power amp
- Can be used to boost Plena Voice alarm systems with system monitoring
- XLR and jack input with XLR and Jack loop through outputs
- 100 volt line input. Ideal for remote location booster amps
- 100v, 70v and 8 ohm outputs
- 24v override relay output
- Temperature controlled fan
- AC and 24VDC operation
- LED VU Meter
- Dual inputs with priority switching
- Temperature controlled forced front to back
- Mains, battery back-up, and pilot tone supervision
- TÜV certified according to IEC 60849
-
Call Station Numeric Keypad
50,500৳Add to cartThe Call-Station Numeric Keypad is used in combination with a basic or remote call-station. The call-station provides the microphone and press-to-talk key, while the numeric keypad can be used for user access, zone and zone group selection. It works together with call-station keypads for pre-configured actions. The built-in LCD provides feedback to the user.
-
BOSCH DCNM-WAP Wireless Access Point
Read more- Truly wireless, no need for an additional WiFi router for tablet control.
- Easy and intuitive web browser interface for system setup, configuration, control and licensing.
- Native support for camera control.
- Range test function to guarantee that all Wireless Devices are in range, independent of the selected WiFi frequency.
- Remote interfacing using API to control microphones and third‑party camera systems. Zero Interference
- Seamless automatic wireless frequency channel switching.
- Operates in the (license‑free) bands:
- 2.4 GHz.
- 5 GHz (UNII‑1, UNII‑2, UNII‑2 extended, and UNII‑3).
- Packet Loss Concealment to mask the effects of lost or discarded packets.
Call for Price
Reviews
There are no reviews yet.