BOSCH PRS-2P250 Presadio Controller
SKU:235,000৳
The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
BOSCH PRS-2P250 Presadio Controller Specs:
- Connector: 9-pole header for removable screw connector
- Connectors: Removable screw terminals
- Connectors: Removable screw terminals
- Storage Temperature : -20 to +70 ºC (-4 ºF to +158 ºF)
- Control Inputs : 8 x
- Relative Humidity: 15 to 90 %
- Control Outputs: 1 x per amplifier channel
- Operation: Closing contact (with supervision)
- Main Power Consumption: 354/43/16 W
- Product Weight: 29.98 lbs
- Rated load resistance: 40 ohms (100 V); 20 ohms (70 V) 10 ohm (50 V)
- Rated load Capacitance : 125 nF (100 V); 250 nF (70 V) 500 nF (50 V)
- Rated output power (per channel): 250 W (1 min. at 55 °C)
125 W (30 min. at 55 °C, cont. at 30 °C)
60 W (cont. at 55 °C) - Color: Charcoal with silver
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 23 F
- Mounting Standalone: 19-inch rack
- Air pressure 600 to 1100: hPa
- Battery Power consumption: 327/30/5 W
- Amplifier Type – Power Amplifier
| Brand |
|---|
Related products
-
Bosch Dicentis DCNM-HDMIC
Read moreThe Bosch DCNM-HDMIC is a discreet plug-in microphone for the Bosch Dicentis wireless discussion devices – DCNM-WD and DCNM-WDE.
The unobtrusive design enables a clear and unobstructed view of the meeting room and two precisely positioned capsules give a high-directive response, ideal for noisy conditions.
The DCNMHDMIC has low susceptibility to interference from mobile phones and red or green illuminators indicate whether the microphone is active (red) or whether the request-to-speak is accepted.
- Discrete microphone for user convenience
- High directive response
- Low susceptible for mobile phones Ultra low noise
- Freedom of movement
Call for Price
-
BOSCH PLE1MA060 Mixer Amplifier
51,000৳Add to cartThe BOSCH PLE1MA060 mixer amplifier is a 60-watt public address amplifier suitable for 100-volt line commercial audio systems as well as low impedance sound systems using 8-ohm loudspeakers. From the Plena range of mixer amplifiers, the Bosch PLE1MA060 is built to a high quality and features excellent sound and speech intelligibility thanks to a smart equalizing approach and built-in limiters.
Easy to use, with simple zone labels included in the box as well as setting indicators which enable the installer to place colored markers on the volume and tone controls to indicate optimum and maximum recommended volume settings.
Despite its simplicity, the PLE 1MA060 still has flexible features such as ducking, priority paging, and voice-activated emergency override. 19″ rack mounting brackets are included should you wish to build into a 19″ equipment rack.
- 60 watt, 100-volt line
- Also compatible with 8-ohm speakers
- 4 low noise balanced inputs for mic or line with phantom power
- 3 separate line inputs
- Further 100-volt input and Telephone input with priority
- RJ45 connection for remote wall plate WP3S2Z (see ancillary section)
- Contact closure and Vox priority
- Built-in chime for announcements
- Zone labeling and setting indicator pins
- Smart equalizing
- AC and 24VDC operation
- LED VU Meter
- 19″ rack mount brackets included
-
BOSCH LBB 1990/00 Plena Voice Alarm Controller
228,000৳Add to cartThe Plena LBB 1990/00 Voice Alarm Controller unit, is the heart of the voice alarm system. It is the basis of the Plena Voice Alarm System and has all the essential functionality for compliance with the EN54‑16 and EN60849 standards, including full system supervision, loudspeaker line impedance supervision, a supervised emergency microphone on the front panel, and a supervised message manager.
The LBB1990/00 enables messages to be merged to allow even more flexible use of pre-recorded announcements and evacuation messages. The controller can be used as a stand-alone system with up to six zones or expanded to up to 120 zones using additional six-zone routers.
Up to eight call stations can be connected. Interconnections are made using standard RJ45 connectors and shielded CAT-5 cable.
A built-in 240 W amplifier provides the power for the emergency call channel and BGM. Additional Plena Amplifiers can be added to provide two-channel operation. All amplifiers are supervised. The audio output uses standard analog audio 100 V line switching for full compatibility with the Plena family of public address equipment and Bosch EVAC-compliant loudspeakers. The system is configured using DIP switches for basic functionality and a PC for more advanced functions.
- Basic 6 zone system
- Expandable to 60 zones
- Up to 8 call stations can be connected
- Built-in 240 watt booster amp
- Digital message system
- Up to 255 pre-recorded messages and chimes/tones can be stored
- The emergency mic on the front panel
- 16 priority levels
- Individual BGM control for each zone
- Standard and emergency control in and outputs
- Additional Booster amps are supervised
- Can be set up using PC or via DIP switches
- Fully complies with IEC60849 and all national equivalents
Reviews
There are no reviews yet.