ITC T-7800A IP Network PA & Intercom System Software
SKU:407,000৳
1) Using CPU Core i7, which could support up to 1,000 terminals;
2) Using dual-channel memory 8G DDR3;
3) Using high speed 256G SSD
4) With dual network interface to meet the demand of high speed data exchange;
5) Using 17-inch 16:9 HD screen of 1920x1080P, which is with LVDS digital interface;
6) With pull-style industrial level keyboard;
7) Using industrial level touch mouse;
8) Using 2 channel sound card, which could be expanded to 14 channel;
ITC T-7800A IP Network PA & Intercom System Software Specs:
| Model | T-7800A |
| Screen Size | 17-Inch |
| Screen Color | TFT 16 Bit True Color |
| Operation Method | 1240×768 Liquid Crystal Resistive Touch Screen (5 Wire) |
| Working Temp. | 5℃ to +60℃ |
| Working Relative Humidity | ≧75% |
| Hard Drive | SSD |
| Network Card | 1000M |
| SNR of System Audio Signal | Line: 70dB；Mic：60dB |
| Distortion of System Audio Signal | 1KHz<0.5% |
| Standard Input Level of System Audio Signal | Line: 300mV；Mic：5mV |
| Standard Output Level of System Audio Signal | 0dBV |
| Power Consumption | AC 220V/50Hz/300W |
| Dimension (WxDxH) | 484x310x314mm |
| Weight | 11Kg |
| Brand |
|---|
Related products
-
BOSCH PRS 4P125 Presadio Controller
266,000৳Add to cartThere are four types of Power Amplifier units in the Praesideo product range. These differ in the number of amplifier channels per frame: one, two, four, or eight. The overall power rating is 500 watts for all of the amplifiers. The Power Amplifiers can be set to 100 V, 70 V, and 50 V output tappings. They have short-to-ground and short-circuit detection functions, and can generate their own pilot tone for supervision purposes.
Functions:
The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short circuits. Control outputs are freely programmable for faults and call-related actions. The 2 x 16-character display and the rotary control enable local status inquiries. The display shows the VU? meter reading, when the audio monitoring mode is active. Audio can be monitored by headphones.
The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC backup supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
- 1, 2, 4, or 8 audio outputs (selection from 100/70/50 V outputs)
- Audio processing and delay for each amplifier channel
- Amplifier supervision and spare amplifier switching
- Loudspeaker line and loudspeaker supervision (LBB 4428/00 only line supervision)
- Eight control inputs and 1, 2, 4, or 8 control outputs
-
BOSCH LBB1938 Power Amplifier
133,000৳Add to cartThe Bosch LBB 1938/20 is a powerful 480 W power amplifier in a 3U high 19”case for rack mounting or tabletop use.
LEDs on the front panel of the LBB1938/20 show the status of the amplifier: power, audio output level, and supervised functions.
This high performance unit fulfills a wide range of public address requirements at a surprisingly low cost.
There are two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not get any announcements made via the priority input.
Rack mounting brackets supplied.
- 480 watts
- Very high audio performance power amp
- Can be used to boost Plena Voice alarm systems with system monitoring
- XLR and jack input with XLR and Jack loop through outputs
- 100 volt line input. Ideal for remote location booster amps
- 100v, 70v and 8 ohm outputs
- 24v override relay output
- Temperature controlled fan
- AC and 24VDC operation
- LED VU Meter
- Dual inputs with priority switching
- Temperature controlled forced front to back
- Mains, battery back-up, and pilot tone supervision
- TÜV certified according to IEC 60849
-
ITC T-67500 Rack Mount Network Audio Adapter
68,000৳Add to cartIP network Amplifier with built-in 500W amplifier
> Directly receives streaming audio via the Internet and transmits to 70V, 100V, and low impedance speakers
> Completely integrates with almost any existing TCPIP network
> Extremely cost-effective network audio solution for multiple speaker applications
> 5″ LCD screen on the front panel for clear and simple operation
> Zone capabilities include: one unit set as one zone or multiple units set as one zone
> One Aux input and one local microphone input, both with volume control
> Configurable remotely over IP – Volume control, IP address, local program selection etc.
> Voice evacuation system with higher priority and local input with secondary priority
> Local input and program source priority fully customizable
-
ITC T-6700R IP Network PA & Intercom System Controller
75,000৳Add to cart- Compatible with Windows 2000, Windows XP, and Windows 7 operation system
- Full-duplex communication system software
- Compatible of network audio system and intercom two systems
- Standard TCP/IP communication protocol for industrial applications
- Parameters set up center and administrator management center
- Built-in decoder to transfer analog signal through the sound card into digital
- Head of the network audio system
- Collect and deliver sound over the internet
- A built-in weekly timer to program over music or sound files to automatically broadcast to the designated zone at pre-set time
- Built-in system status display to surveillance each unit is working conditions
- Direct manual selected priority music broadcast or zone paging
- License code registration software
- Password protection to change configuration and log in
- Remote set up and easy maintenance
- Support more than 1,00 tasks transmitted simultaneously
- Nine priority levels for different users
- A customized-mapped connection diagram is available
- Easy to inter-work with third-party system like CCTV, door access system, and home automation system
Reviews
There are no reviews yet.