ITC T-7800A IP Network PA & Intercom System Software
SKU:407,000৳
1) Using CPU Core i7, which could support up to 1,000 terminals;
2) Using dual-channel memory 8G DDR3;
3) Using high speed 256G SSD
4) With dual network interface to meet the demand of high speed data exchange;
5) Using 17-inch 16:9 HD screen of 1920x1080P, which is with LVDS digital interface;
6) With pull-style industrial level keyboard;
7) Using industrial level touch mouse;
8) Using 2 channel sound card, which could be expanded to 14 channel;
ITC T-7800A IP Network PA & Intercom System Software Specs:
| Model | T-7800A |
| Screen Size | 17-Inch |
| Screen Color | TFT 16 Bit True Color |
| Operation Method | 1240×768 Liquid Crystal Resistive Touch Screen (5 Wire) |
| Working Temp. | 5℃ to +60℃ |
| Working Relative Humidity | ≧75% |
| Hard Drive | SSD |
| Network Card | 1000M |
| SNR of System Audio Signal | Line: 70dB；Mic：60dB |
| Distortion of System Audio Signal | 1KHz<0.5% |
| Standard Input Level of System Audio Signal | Line: 300mV；Mic：5mV |
| Standard Output Level of System Audio Signal | 0dBV |
| Power Consumption | AC 220V/50Hz/300W |
| Dimension (WxDxH) | 484x310x314mm |
| Weight | 11Kg |
| Brand |
|---|
Related products
-
BOSCH PRS-2P250 Presadio Controller
235,000৳Add to cartThe Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
-
BOSCH PRS 2P250 Presadio Power Amplifiers
280,000৳Add to cart- BOSCH PRS 2P250 presadio power amplifiers 1, 2, 4, or 8 audio outputs (selection from 100/70/50 V outputs)
- Audio processing and delay for each amplifier channel
- Amplifier supervision and spare amplifier switching
- Loudspeaker line and loudspeaker supervision (LBB 4428/00 only line supervision)
- Eight control inputs and 1, 2, 4, or 8 control outputs
-
BOSCH LBB 1990/00 Plena Voice Alarm Controller
228,000৳Add to cartThe Plena LBB 1990/00 Voice Alarm Controller unit, is the heart of the voice alarm system. It is the basis of the Plena Voice Alarm System and has all the essential functionality for compliance with the EN54‑16 and EN60849 standards, including full system supervision, loudspeaker line impedance supervision, a supervised emergency microphone on the front panel, and a supervised message manager.
The LBB1990/00 enables messages to be merged to allow even more flexible use of pre-recorded announcements and evacuation messages. The controller can be used as a stand-alone system with up to six zones or expanded to up to 120 zones using additional six-zone routers.
Up to eight call stations can be connected. Interconnections are made using standard RJ45 connectors and shielded CAT-5 cable.
A built-in 240 W amplifier provides the power for the emergency call channel and BGM. Additional Plena Amplifiers can be added to provide two-channel operation. All amplifiers are supervised. The audio output uses standard analog audio 100 V line switching for full compatibility with the Plena family of public address equipment and Bosch EVAC-compliant loudspeakers. The system is configured using DIP switches for basic functionality and a PC for more advanced functions.
- Basic 6 zone system
- Expandable to 60 zones
- Up to 8 call stations can be connected
- Built-in 240 watt booster amp
- Digital message system
- Up to 255 pre-recorded messages and chimes/tones can be stored
- The emergency mic on the front panel
- 16 priority levels
- Individual BGM control for each zone
- Standard and emergency control in and outputs
- Additional Booster amps are supervised
- Can be set up using PC or via DIP switches
- Fully complies with IEC60849 and all national equivalents
Reviews
There are no reviews yet.