BOSCH LBC 1400/10 Volume controller
SKU:3,200৳
BOSCH LBC 1400/10 Volume controller Specs:
- 12 W, 36 W, and 100 W versions
- Built-in 24 V DC override relay
- Continuous rotating system
- Suitable for both 3-wire and 4-wire systems
- Up to 5-channel program selector
- Fits within MK, U40, and Japanese installation material
- Optional surface mounting box for MK and U40versions
- Comply with international installation and safety regulations
| Brand |
|---|
Related products
-
BOSCH LBB 1990/00 Plena Voice Alarm Controller
228,000৳Add to cartThe Plena LBB 1990/00 Voice Alarm Controller unit, is the heart of the voice alarm system. It is the basis of the Plena Voice Alarm System and has all the essential functionality for compliance with the EN54‑16 and EN60849 standards, including full system supervision, loudspeaker line impedance supervision, a supervised emergency microphone on the front panel, and a supervised message manager.
The LBB1990/00 enables messages to be merged to allow even more flexible use of pre-recorded announcements and evacuation messages. The controller can be used as a stand-alone system with up to six zones or expanded to up to 120 zones using additional six-zone routers.
Up to eight call stations can be connected. Interconnections are made using standard RJ45 connectors and shielded CAT-5 cable.
A built-in 240 W amplifier provides the power for the emergency call channel and BGM. Additional Plena Amplifiers can be added to provide two-channel operation. All amplifiers are supervised. The audio output uses standard analog audio 100 V line switching for full compatibility with the Plena family of public address equipment and Bosch EVAC-compliant loudspeakers. The system is configured using DIP switches for basic functionality and a PC for more advanced functions.
- Basic 6 zone system
- Expandable to 60 zones
- Up to 8 call stations can be connected
- Built-in 240 watt booster amp
- Digital message system
- Up to 255 pre-recorded messages and chimes/tones can be stored
- The emergency mic on the front panel
- 16 priority levels
- Individual BGM control for each zone
- Standard and emergency control in and outputs
- Additional Booster amps are supervised
- Can be set up using PC or via DIP switches
- Fully complies with IEC60849 and all national equivalents
-
Bosch PRS-CSI Call Station Interface
70,000৳Add to cartProduct Code: OTC2472
The PRS-CSI is an interface between a single remote call station, PRS-CSR, or a remote call station kit, PRS-CSRK, and the fiber optical Praesideo network. It uses CAT-5 cable for the connection to the remote call station. The CAT-5 cable, carrying digital audio and control data, can be as long as 1 km.
The length of the CAT-5 cable is not a part of the Praesideo optical network length. This considerably increases the overall possible length of the optical network, especially in cases, where the call station is located far from the rest of the system.
The call station interface can get its power from the Praesideo network, and/or from a local power supply. It is fully supervised. -
BOSCH PRS-2P250 Presadio Controller
235,000৳Add to cartThe Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call-related actions.
The 2 x 16‑character display and the rotary control enable local status inquiries. The display shows the VU‑meter reading when the audio monitoring mode is active. Audio can be monitored by headphones. The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input. The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.
Controls and indicators • 2 x 16-character LCD for status display • Rotary/push control button • Mains switch • Voltage selector for PRS‑xPxxx Interconnections • Mains input • Battery backup input • Two system network connections • Two mic/line inputs (four for LBB 4428/00) • Selectable 100 V, 70 V or 50 V outputs (per channel) • Fixed 50 V output • Eight programmable control inputs • Control output (for each amplifier channel) • Headphone output • Spare amplifier connection (for each amplifier channel)
Reviews
There are no reviews yet.