BOSCH PLE1CS Plena Call Station With 6 Zones
SKU:48,800৳
The BOSCH PLE1CS Plena call station paging microphone is a stylish design high-quality call station with a stable metal base, a flexible microphone stem, and a unidirectional condenser microphone. The LBB1956/00 can make calls to selected zones (one to six and all-call) in a public address system built with the Plena Voice Alarm System. In addition to tabletop use, the special design allows it to be neatly flush-mounted on desktops.
- Stylish six-zone call station for the Plena Voice Alarm System
- Uni-directional condenser mic on a flexible stem
- Six zone selection keys, all-call key, and momentary PTT-key for calls
- Selectable gain, speech filter, limiter, and output level for improved intelligibility
- LED indications for zone selection, fault, and emergency state
- Call station extension provides seven additional zone and zone group keys
- Allows connection of expansion keypad LBB1957
BOSCH PLE1CS Plena Call Station With 6 Zones Specs:
Controls and indicators
- Four status LEDs
- PTT-key
- PTT status LED
- Six zone selection keys
- Six zone selection LEDs
- All-call key
- Eight DIP switches
- Rotary volume control
Interconnections
- Two RJ45 jacks
- 24 VDC input
- Keypad connector
| Brand |
|---|
Related products
-
ITC T-67120 Rack Mount Network Audio Adapter
86,000৳Add to cart- Standard rack mount design and it’s in brushed aluminum case.
- It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
- It’s built in DSP so that it could process information quickly and start up less than 1s.
- It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP, IGMP, which achieve transmitting stereo audio in 16 bit in the network.
- It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
- With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
- With 1 EMC input with highest priority.
- With 1 AUX output to connect external power amplifier.
- With 1 3-wire forced switching output for volume control.
- Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa. And users could write program to control the power.
- With function to preset the mute depth and the background music.
- Support remotely unicast.
- Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
- Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
- With authorization operation management system.
- Support PSTN phone broadcast and SM voice broadcast.
- Support on demand unicast via Wifi and IR remote controller.
- Support spare line design for power supply at DC 24V
- With indicator to display status, level, protection, standby, etc.
- Support PC to modify its IP address via its serial port.
- This IP PA system adopt common network design so that the installation is convenient.
- Standby power is less than 3W.
-
BOSCH LBB1938 Power Amplifier
133,000৳Add to cartThe Bosch LBB 1938/20 is a powerful 480 W power amplifier in a 3U high 19”case for rack mounting or tabletop use.
LEDs on the front panel of the LBB1938/20 show the status of the amplifier: power, audio output level, and supervised functions.
This high performance unit fulfills a wide range of public address requirements at a surprisingly low cost.
There are two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not get any announcements made via the priority input.
Rack mounting brackets supplied.
- 480 watts
- Very high audio performance power amp
- Can be used to boost Plena Voice alarm systems with system monitoring
- XLR and jack input with XLR and Jack loop through outputs
- 100 volt line input. Ideal for remote location booster amps
- 100v, 70v and 8 ohm outputs
- 24v override relay output
- Temperature controlled fan
- AC and 24VDC operation
- LED VU Meter
- Dual inputs with priority switching
- Temperature controlled forced front to back
- Mains, battery back-up, and pilot tone supervision
- TÜV certified according to IEC 60849
-
Bosch PRS-CSR Call Station Remote
65,500৳Add to cartThe PRS-CSR is a call station with the same functionality as the basic call station, LBB 4430/00, but it uses CAT-5 cable for its connection to the Praesideo network. It connects, one-to-one, to the call station interface, PRS-CSI, which is part of the Praesideo optical network.
The CAT-5 cable, carrying digital audio and control data, can be as long as 1 km. The length of the CAT-5 cable is not a part of the Praesideo optical network length. This considerably increases the overall possible length of the optical network.
The PRS-CSR can be extended with up to 16 keypads (LBB 4432/00 or LBB 4434/00), each with eight programmable keys. Extension with a numeric keypad (PRS-CSNKP) is also possible.
Reviews
There are no reviews yet.