Category
- Access Control
- Access Control Package
- Accessories
- Adapters and Connectors
- Agro
- Astronomical Equipment
- Audio Accessories
- Bangla Quran Speaker
- Barcode Scanner
- Battery and Accessories
- Best Speaker
- Blackmagic Design
- Call Station
- Camera
- Capture Devices
- Car Checking System
- CCTV & Accessories
- Classroom Sound System
- Conference System
- Dash Camera
- Document Camera
- Elevator Controller
- Forklift
- GNSS Receiver and Accessories
- Guard Patrol System
- Lighting System
- Medical Equipment
- Megaphone
- Memory & HDD
- Metal Detector
- Microphone
- Microphone Foam Cover
- Microscope/Binocular
- Mosque Sound Solution Package
- Networking Products
- OLT Products
- PA
- PA Amplifier
- PA System
- PABX System
- Paperless Conference System
- Passport Scanner
- Podium System
- Portable Amplifier
- POS Terminal Device
- Power Supply
- Printer
- Projector
- PTZ Camera
- Repeater
- RFID Accessories
- Router
- Safety Products
- Security Products
- Smart Board Bangladesh
- Smart Door Lock
- Spill Kit
- Studio & ENG Camera
- Tools & Equipment
- Traffic Equipment
- Turnstile Gate
- VHF & UHF Antennas
- Video Conference
- Video Intercom System
- Walk Through Metal Detector
- Walkie Talkie
- Walkie-Talkie Battery & Accessories
- Wireless Conference System
- Wireless Guide System
- Wireless Products
- X-Ray Baggage Scanner
- Zoom Software
Category: PA System
Showing 21–38 of 38 resultsSorted by latest
-
ITC T-67120 Rack Mount Network Audio Adapter
86,000৳Add to cart- Standard rack mount design and it’s in brushed aluminum case.
- It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
- It’s built in DSP so that it could process information quickly and start up less than 1s.
- It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP, IGMP, which achieve transmitting stereo audio in 16 bit in the network.
- It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
- With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
- With 1 EMC input with highest priority.
- With 1 AUX output to connect external power amplifier.
- With 1 3-wire forced switching output for volume control.
- Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa. And users could write program to control the power.
- With function to preset the mute depth and the background music.
- Support remotely unicast.
- Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
- Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
- With authorization operation management system.
- Support PSTN phone broadcast and SM voice broadcast.
- Support on demand unicast via Wifi and IR remote controller.
- Support spare line design for power supply at DC 24V
- With indicator to display status, level, protection, standby, etc.
- Support PC to modify its IP address via its serial port.
- This IP PA system adopt common network design so that the installation is convenient.
- Standby power is less than 3W.
-
ITC T-6760 Rack Mount Network Audio Adapter Power Amplifier
104,160৳Add to cart- IP network audio adapter built-in digital class-D 60W, 120W, 240W & 350W amplifier.
- Direct to receive internet audio source and transmit to 70V, 100V, and low impedance loudspeakers.
- Non-dedicated network system solution.
- Could be installed anywhere of the LAN network.
- Economy network audio solution for multiple speaker applications.
- With a 3.4 inch LCD screen humanized operation interface.
- Zone definition is done through software, each network audio adapter could be regarded as one zone, or several audio adapters could be taken as one zone, moreover, several zones could be defined as a group for synchronous operation.
- One Aux input and one local microphone input, both with volume control.
- Remote control over IP address change and write-in, volume control, and local program selection from the server.
- Voice evacuation system with higher priority and local input with secondary priority. Moreover, the local input and program source priority could be customized
-
ITC T-7701 Rack Mount Network Audio Adapter
1৳Add to cart- Operate a 30,000sqm factory
- 15 years of audiovisual experience
- Integrating research, production, sales, and service
- 10 major product series and 1,000+ models
- ITC T-7701 adapter supports OEM & ODM service
-
ITC-t-6701 Rack Mount Network Audio Adapter Power Amplifier
35,500৳Add to cart- 19 rack mount IP/TCP network audio adapter in 2U height
- ITC-t-6701 amplifier built-in single-channel TCP/IP decoder
- Decode digital audio data to analog amplifier
- Heart of IP background music, zone paging & voice alarm system
- Built-in 3.4 inch LCD screen displays the IP address and status in English
- Supplied a remote control over music selection, IP address change and volume attenuation
- A serial IP address write in communication port
- Numeric keys on the front panel for convenient operation
- 4 channel line outputs to amplifiers
- 4 channel 100V speaker inputs loop and 4 channel 3 wired volume control inputs
- 1 external line input (with volume control) and microphone input
- Automatically power off when no input for 5 minutes and automatically power on when
- signal feed into
- Pre-set power management
-
ITC T-7700R IP Network PA & Intercom System Software
1৳Add to cartInstalled in the main controlling room, duty room, or leader office, you can proceed with one-way broadcast (to point, partition, or all zones), and full intercom
-
ITC T-6700R IP Network PA & Intercom System Controller
75,000৳Add to cart- Compatible with Windows 2000, Windows XP, and Windows 7 operation system
- Full-duplex communication system software
- Compatible of network audio system and intercom two systems
- Standard TCP/IP communication protocol for industrial applications
- Parameters set up center and administrator management center
- Built-in decoder to transfer analog signal through the sound card into digital
- Head of the network audio system
- Collect and deliver sound over the internet
- A built-in weekly timer to program over music or sound files to automatically broadcast to the designated zone at pre-set time
- Built-in system status display to surveillance each unit is working conditions
- Direct manual selected priority music broadcast or zone paging
- License code registration software
- Password protection to change configuration and log in
- Remote set up and easy maintenance
- Support more than 1,00 tasks transmitted simultaneously
- Nine priority levels for different users
- A customized-mapped connection diagram is available
- Easy to inter-work with third-party system like CCTV, door access system, and home automation system
-
BOSCH PVA 20CSE Call Station Extension
73,500৳Add to cartThe BOSCH PVA 20CSE is a Call Station Extension for the Paviro System. The Call Station Extension has 20 customization selection buttons.
- 20 free customizable functions keys, and two LEDs per button (green/red).
- The LED of BOSCH PVA 20CSE shall also be programmable for its own indication functionality.
- Fascia cover with transparent areas for customizable labels.
- RJ12 cable for data connection to call station or another keypad.
- Max. 5 keypads per call station.
- Sends & receives operational control to and from the call station
-
BOSCH PVA-15CST Call Station
102,000৳Add to cart-
Five menu/function keys (pre-programmed) – one green or one yellow indicator light per button
-
15 selection buttons (customizable) – two indicator lights (green/red) per button
-
Label with transparent covering – the label can be changed at any time
-
BOSCH PVA-15CST Call Station can be used as a standing or desk/rack flush-mounted device
-
Internal monitoring with error logging – complying with all relevant national and international standards
-
Easy configuration – use of the Configuration Wizard or IRIS-Net software
-
Button installation slots for up to 3 optional emergency buttons, or key switches
-
-
BOSCH PVA 2P500 PAVIRO Power Amplifier
307,500৳Add to cartThe BOSCH PVA 2P500 PAVIRO power amplifier is a 2 x 500 Watt professional audio Class D-amplifier for evacuation purposes. It can be operated from both the mains and a DC supply.
- Floating 100 V or 70 V power outputs
- High efficient amplifier blocks in class-D technology
- Outputs idling and short circuit-protected
- Mains operation 120–240 V (50/60 Hz) and/or 24 V DC emergency backup
- Electronically balanced inputs
- Temperature monitoring function
- Pilot tone and ground fault monitoring function via PVA-4CR12 controller or PVA-4R24 router
- Processor control of all functions
- Monitoring of the processor system via watchdog circuit
- Non-volatile FLASH memory for configuration data
- Internal monitoring function
- Integrated audio relays
- Line monitoring function
-
BOSCH PVA 4R24 PAVIRO Router
305,000৳Add to cartThe Bosch PVA-4R24 24 Zone Router is a zone extension for the PAVIRO system enabling the addition of 24 zones, 20 GPIs, 24 GPOs, and 2 control relays to the system and is controlled and supervised via the CAN bus by the PVA-4CR12
- Routing up to 24 zones from 2–500 Watt
- Low power consumption in standby mode
- Extreme flexibility
- Excellent sound quality > 103 dB s/n ratio
-
BOSCH PAVIRO PVA 4CR12 Controller
362,000৳Add to cartThe PVA-4CR12 controller is the central paging manager for the PAVIRO system. Eight local audio inputs can be switched to four audio outputs. A two channel message manager is integrated. The controller provides all the audio processing, supervision and control functions for a complete PAVIRO system.
- Low power consumption in standby mode
- Extreme flexibility
- Excellent sound quality >106 dB s/n ratio
- Up to 85 minutes internal digital message storage
-
BOSCH LBB 1957/00 Call Station
46,400৳Add to cartThe Bosch LBB 1957/00 keypad is an extension to the LBB 1956/00 Plena Voice Alarm Call Station that adds seven additional zone-select keys. The LBB1957/00 has the same stable metal base as the call station. In addition to tabletop use, the special design allows it to be neatly flush-mounted on desktops.
- Seven zone selection keys (6 programmable keys and all call)
- LED indications for zone selection
- Up to eight keypads can be connected together
- EN 60849 compliant
- Emergency, call, power, and fault indicators
- Use in conjunction with the LBB1956/00 call station
-
BOSCH PLE1CS Plena Call Station With 6 Zones
48,800৳Add to cartThe BOSCH PLE1CS Plena call station paging microphone is a stylish design high-quality call station with a stable metal base, a flexible microphone stem, and a unidirectional condenser microphone. The LBB1956/00 can make calls to selected zones (one to six and all-call) in a public address system built with the Plena Voice Alarm System. In addition to tabletop use, the special design allows it to be neatly flush-mounted on desktops.
- Stylish six-zone call station for the Plena Voice Alarm System
- Uni-directional condenser mic on a flexible stem
- Six zone selection keys, all-call key, and momentary PTT-key for calls
- Selectable gain, speech filter, limiter, and output level for improved intelligibility
- LED indications for zone selection, fault, and emergency state
- Call station extension provides seven additional zone and zone group keys
- Allows connection of expansion keypad LBB1957
-
BOSCH PLE2CS Plena Call Station
35,700৳Add to cartThe Bosch Plena PLE-2CS 2 zone paging microphone is a high-quality call station with a sturdy metal base designed for use with the PLE series of amplifiers such as the Bosch PLE-2MA120 and PLE-2MA240. In addition to tabletop use, the special design of the PLE2CS enables the unit to be neatly flush-mounted. 2 zone selection keys enable either or both zones to be selected for paging – indicated by LEDs.
- Modern two-zone call station for the PLE series
- Selectable gain
- Speech filter and limiter
- Output level control
- Loop-through option for up to 8 call stations
- LED indications for zone selection, busy, and power on
-
BOSCH Plena PLE1CS Call Station
20,000৳Add to cartThe Plena PLE-1CS tabletop unidirectional condenser paging microphone is a high-quality call station with a sturdy metal base designed for use with the BOSCH PLE series of amplifiers. In addition to tabletop use, the special design enables the unit to be neatly flush-mounted.
The PLE1CS microphone features a large press to talk call button for ease of use and the flexible gooseneck enables the microphone to be positioned as required. A green LED confidence light illuminates to let you know the mic is in use.
- PTT-key for calls for activation
- Momentary or toggle
- Green LED, indicating microphone active
- Stable metal base design with fixed 2 m cable and lockable Euro-style connector
- Phantom powered by the amplifier
-
BOSCH LBB 1990/00 Plena Voice Alarm Router
120,000৳Add to cartThe Bosch LBB 1992/00 Plena Voice Alarm Router is an expansion unit that can add six zones and 12 input contacts to the Voice Alarm System. It can use the built-in amplifier on the LBB 1990/00 Voice Alarm Controller and provides inputs and outputs for one or two amplifiers in a multi-amplifier one or two-channel system. The LBB1992/00 provides dual-channel operation for calls and BGM simultaneously to a maximum of six different zones, using two Plena amplifiers.
Additionally, the single-channel operation is possible with only one Plena amplifier. Multiple routers can also share one amplifier, including the internal amplifier on the controller unit. It is possible to use any number of amplifiers from one up to the number of routers used.
- The controller supports A/B wiring.
- Expand the voice alarm system with six zones
- EN 54‑16 certified and EN 60849 compliant
- 12 additional input contacts
- Six volume override output contacts
- Supervision within the Plena Voice Alarm System
- Up to 9 routers can be used
- Same functionality as the system controller
- Uses System controllers built-in amp or additional Plena booster amps
-
BOSCH LBB 1990/00 Plena Voice Alarm Controller
228,000৳Add to cartThe Plena LBB 1990/00 Voice Alarm Controller unit, is the heart of the voice alarm system. It is the basis of the Plena Voice Alarm System and has all the essential functionality for compliance with the EN54‑16 and EN60849 standards, including full system supervision, loudspeaker line impedance supervision, a supervised emergency microphone on the front panel, and a supervised message manager.
The LBB1990/00 enables messages to be merged to allow even more flexible use of pre-recorded announcements and evacuation messages. The controller can be used as a stand-alone system with up to six zones or expanded to up to 120 zones using additional six-zone routers.
Up to eight call stations can be connected. Interconnections are made using standard RJ45 connectors and shielded CAT-5 cable.
A built-in 240 W amplifier provides the power for the emergency call channel and BGM. Additional Plena Amplifiers can be added to provide two-channel operation. All amplifiers are supervised. The audio output uses standard analog audio 100 V line switching for full compatibility with the Plena family of public address equipment and Bosch EVAC-compliant loudspeakers. The system is configured using DIP switches for basic functionality and a PC for more advanced functions.
- Basic 6 zone system
- Expandable to 60 zones
- Up to 8 call stations can be connected
- Built-in 240 watt booster amp
- Digital message system
- Up to 255 pre-recorded messages and chimes/tones can be stored
- The emergency mic on the front panel
- 16 priority levels
- Individual BGM control for each zone
- Standard and emergency control in and outputs
- Additional Booster amps are supervised
- Can be set up using PC or via DIP switches
- Fully complies with IEC60849 and all national equivalents
-
BOSCH LBB1938 Power Amplifier
133,000৳Add to cartThe Bosch LBB 1938/20 is a powerful 480 W power amplifier in a 3U high 19”case for rack mounting or tabletop use.
LEDs on the front panel of the LBB1938/20 show the status of the amplifier: power, audio output level, and supervised functions.
This high performance unit fulfills a wide range of public address requirements at a surprisingly low cost.
There are two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not get any announcements made via the priority input.
Rack mounting brackets supplied.
- 480 watts
- Very high audio performance power amp
- Can be used to boost Plena Voice alarm systems with system monitoring
- XLR and jack input with XLR and Jack loop through outputs
- 100 volt line input. Ideal for remote location booster amps
- 100v, 70v and 8 ohm outputs
- 24v override relay output
- Temperature controlled fan
- AC and 24VDC operation
- LED VU Meter
- Dual inputs with priority switching
- Temperature controlled forced front to back
- Mains, battery back-up, and pilot tone supervision
- TÜV certified according to IEC 60849